2012-02-20

New brain connections form in clusters during learning

The researchers studied mice as they learned new behaviors, such as reaching through a slot to get a seed. They observed changes in the motor cortex, the brain layer that controls muscle movements, during the learning process. Specifically, they followed the growth of new "dendritic spines," structures that form the connections (synapses) between nerve cells.

"For the first time we are able to observe the spatial distribution of new synapses related to the encoding of memory," said Yi Zuo, assistant professor of molecular, cell and developmental biology at UC Santa Cruz and corresponding author of the paper.

In a previous study, Zuo and others documented the rapid growth of new dendritic spines on pyramidal neurons in the motor cortex during the learning process. These spines form synapses where the pyramidal neurons receive input from other brain regions involved in motor memories and muscle movements. In the new study, first author Min Fu, a postdoctoral researcher in Zuo's lab, analyzed the spatial distribution of the newly formed synapses.

Initial results of the spatial analysis showed that one third of the newly formed synapses were located next to another new synapse. These clustered synapses tended to form over the course of a few days during the learning period, when the mouse was repeatedly performing the new behavior. Compared to non-clustered counterparts, the clustered synapses were more likely to persist through the learning sessions and after training stopped.

In addition, the researchers found that after formation of the second spine in a cluster, the first spine grew larger. The size of the spine head correlates with the strength of the synapse. "We found that formation of a second connection is correlated with a strengthening of the first connection, which suggests that they are likely to be involved in the same circuitry," Zuo said. "The clustering of synapses may serve to magnify the strength of the connections."

Another part of the study also supported the idea that the clustered synapses are involved in neural circuits specific to the task being learned. The researchers studied mice trained first in one task and then in a different task. Instead of grabbing a seed, the mice had to learn how to handle a piece of capellini pasta. Both tasks induced the formation of clustered spines, but spines formed during the learning of different tasks did not cluster together.

The researchers also looked at mice that were challenged with new motor tasks every day, but did not repeat the same task over and over like the ones trained in seed-grabbing or capellini-handling. These mice also grew lots of new dendritic spines, but few of the new spines were clustered.

"Repetitive activation of the same cortical circuit is really important in learning a new task," Zuo said. "But what is the optimal frequency of repetition? Ultimately, by studying the relationship between synapse formation and learning, we want to find out the best way to induce new memories."

The study used mice that had been genetically altered to make a fluorescent protein within certain neurons in the motor cortex. The researchers used a special microscopy technique (two-photon microscopy) to obtain images of those neurons near the surface of the brain. The noninvasive imaging technique enabled them to view changes in individual brain cells of the mice before, during, and after learning a new behavior.

In addition to Zuo and first author Min Fu, the coauthors of the paper include UCSC graduate student Xinzhu Yu and Stanford University biologist Ju Lu. This research was supported by grants from the Dana Foundation and the National Institute of Mental Health.

Recommend this story on Facebook, Twitter,
and Google +1:


New brain connections form in clusters during learning

TAG:Nervous System Psychology Research Neuroscience Educational Psychology Mice Behavioral Science

Surprising molecular switch: Lipids help control the development of cell polarity

Over the last few years, Rong Li, Ph.D., and her team at the Stowers Institute for Medical Research have figured out many important details of the basic biochemical mechanism that establishes cell polarity in yeast. Now, using cutting-edge microscopy and advanced mathematics, the team has discovered a surprising new twist. In the March issue of Nature Cell Biology, predoctoral researcher Arupratan Das, Li, and five colleagues report that, in yeast, an enzyme literally flips a switch by moving molecules called phospholipids from the outer to the inner layer of the cell membrane.

What's more, all the molecules involved in this intricate mechanism are found not just in yeast, but in mammalian cells as well. That opens up new avenues for exploring how cell polarity is created in, say, liver cells, and whether or not glitches in the mechanism can contribute to disease. "Cell polarity is critical for the specialized function of the vast majority of cells," explains Li, who is also a professor in the Department of Molecular and Integrative Physiology at the University of Kansas Medical Center. "Our finding could lead to a lot of clues mechanistically. We're hoping that others will pick up on our discovery and apply it to the cells they study."

Several decades ago, scientists thought that cell polarity might result from external cues -- such as spatially localized chemical signals outside cells that tell the cells how to move and behave. However, researchers have also long noticed that without such localized signals cells can still polarize suggesting that the ability to polarize and bud is innate in the cell.

Li's team uncovered an important clue to the underlying process. Embedded in the cell membrane is a molecule, named Cdc42, that acts as a key regulator. In a non-polarized cell, Cdc42 is randomly distributed around the membrane, like stones randomly set in a brick wall. It also floats around within the cell.

When activated, Cdc42 stimulates the formation of a skeleton of microfilaments that guide free-floating Cdc42 towards the Cdc42 already in the membrane. Some parts of the membrane start out with a bit more Cdc42 than others and the process guided by the microfilaments concentrates the molecule in those areas. Eventually, cells ends up with a high concentration of Cdc42 in one spot -- the spot where the bud will emerge.

Of course it isn't that simple. Membrane-bound Cdc42 can diffuse away but can also be pulled out of the membrane by another molecule named Rdi1and then recycled back to the same spot on the membrane. The speed of the recycling determines how big the eventual spot will be, which directly affects the shape of the bud that grows out.

Imagine ants in a ditch, says Li. They keep running out. To keep them there, you pick them up and put them back. If your hands are fast, you can contain them in a very small area. If your hands are slow, the ants spread out more. It's the same in the yeast cell. Faster recycling of Cdc42 results in a smaller spot on the cell; slower recycling causes a bigger spot. In a 2009 paper, Li's team showed that the recycling process can be fast or slow.

So what controls the speed of Cdc42 dissociation and recycling? Li and her colleagues tackled the question by looking for genes that, when knocked out, affect the speed. They found one that slowed things way down. It was a big surprise. "It wasn't something we were envisioning," says Li. In fact, she wasn't even sure if her team would pursue it. The reason: The gene was for a type of an enzyme known as a lipid flippase, which literally flips lipids from one side of cell membranes to the other. And lipids are "really messy and hard to work with," she says. Predoctoral researcher Arupratan Das, however, was willing to take it on. "I have to give Das a lot of credit -- he's fearless," says Li.

Using cutting-edge fluorescence fluctuation spectroscopy, Das and his colleagues were able to chart the movement of molecules in live yeast cells, and figure out the role of the flippase. Here's what they found:

Near one end of the Cdc42 molecule is a patch with a net positive electrical charge. The cell membrane has a negative charge. As a result, the positively-charged patch of Cdc42 acts like a piece of Velcro, holding the molecule close to the membrane, allowing a lipid anchor at the end of Cdc42 to be stably inserted in the membrane. To pull out the Cdc42 for recycling, Rdi1 must grab this anchor. "Rdi1 cannot go into the membrane, so it needs the Velcro to be loosened," Li explains.

That's where the flippase enzyme comes in. The enzyme was known to flip a charge-neutral phospholipid to the inner layer of the membrane. The membrane thus becomes less negatively charged, allowing the Cdc42 anchor to slip out more easily. It's an example of how "a simple physical interaction can regulate the complex morphogenetic outcome observed during cell polarization," explains Das.

Case closed? Not quite. The researchers were hopeful that they'd uncovered the mechanism based upon their observations with living cells. But in a living cell "it's hard to rule out the effects of something else," says Li. So Das painstakingly created small bits of human-made, reconstituted membrane to test the mechanism. "It was a great challenge and required much troubleshooting before we performed it successfully," he recalls. After a year of effort, it worked. Using an imaging technique called total internal reflection fluorescence microscopy, the team was able to show that the charge of the membrane does indeed determine how fast Cdc42 can be pulled out by Rdi1.

The next challenge will be figuring out what controls the flippase. "There are some hints that it gets even messier -- that the flippase may be regulated by another kind of lipid in the membrane and perhaps other enzymes," says Li. But the work in the new paper is already opening the door to a better understanding of the development of cell polarity in all types of cells. And it points to the power of new experimental tools and mathematical analysis that can help track and count molecules in cells, says Li.

"What the study really highlights is the future of cell biology -- the ability to make these very accurate biochemical and biophysical measurements in single live cells and reconstituted systems, rather than using traditional bulk biochemical assays," says Li.

Researchers who also contributed to the study include Brian D. Slaughter, Jay R. Unruh, William D. Bradford, Richard Alexander and Boris Rubinstein at the Stowers Institute for Medical Research.

The work was part of a project funded by the National Institute of General Medical Sciences.

Recommend this story on Facebook, Twitter,
and Google +1:


Surprising molecular switch: Lipids help control the development of cell polarity

TAG:Stem Cells Lymphoma Lung Cancer Genetics Molecular Biology Cell Biology

Faulty fat sensor implicated in obesity and liver disease

The protein GPR120 is found on the surface of cells in the gut, liver and fat tissue and allows cells to detect and respond to unsaturated fatty acids from the diet, especially the omega-3 fatty acids which are believed to have a beneficial impact on health. Scientists found that mice deficient in GPR120 were more prone to developing obesity and liver disease when fed a high-fat diet. They also found that people with a certain mutation in the gene encoding GPR120, which stops the protein from responding to omega-3 fatty acids, were significantly more likely to be obese.

In the gut, when unsaturated fatty acids from food bind to GPR120, this stimulates the release of hormones that suppress appetite and stimulate the pancreas to secrete insulin. When fat cells sense high levels of fat in the blood through GPR120, it stimulates them to divide to produce more fat cells to store all the fat, reducing the risk of fatty liver and furring of the arteries. This mechanism could be an important pathway for bringing about some of the healthy effects of omega-3s.

When they were fed on a high-fat diet, mice that lacked GPR120 not only became obese but also had fatty livers, lower numbers of fat cells, and poor control of blood glucose. The researchers believe that mice that are deficient in GPR120 have difficulty storing excess fat in fat tissue. Instead, their bodies store fat in areas where it can cause health problems, like the liver, the muscles and in the walls of arteries. In humans, this pattern of obesity is associated with type 2 diabetes and heart disease.

The study involved scientists in the UK, France and Japan. It was led by Professor Philippe Froguel, from the School of Public Health at Imperial College London.

"Being overweight is not always unhealthy if you can make more fat cells to store fat," said Professor Froguel. "Some people seem to be unable to do this, and instead they deposit fat around their internal organs, which is very unhealthy. Our study suggests that in both mice and humans, defects in GPR120 combined with a high-fat diet greatly increase the risk of this unhealthy pattern of obesity. We think GPR120 could be a useful target for new drugs to treat obesity and liver diseases."

The researchers analysed the gene for GPR120 in 6,942 obese people and 7,654 controls to test whether differences in the code that carries instructions for making the protein contribute to obesity in humans. They found that one mutation that renders the protein dysfunctional increases a person's risk of obesity by 60 per cent. The researchers think this mutation mimics the effect of a bad diet lacking in unsaturated omega-3 fat.

Recommend this story on Facebook, Twitter,
and Google +1:


Faulty fat sensor implicated in obesity and liver disease

TAG:Obesity Cholesterol Diet and Weight Loss Mice Food Genetics

Liquid batteries to smooth road for renewable energy

RESEARCHERS at MIT claim liquid batteries could be useful as a long-life and low-cost solution for smoothing out the erratic power supplies of renewable energy sources.

The system uses high-temperature batteries whose liquid components naturally settle into distinct layers because of their different densities.

The three molten materials form the positive and negative poles of the battery, as well as a layer of electrolyte in between. All three layers are composed of materials that are abundant and inexpensive.

Donald Sadoway, the John F. Elliott Professor of Materials Chemistry at MIT and the senior author of the new paper, said the team explored many chemistries in order to find the right combination of electrical properties, density differences and availability.

One combination they found was to use magnesium for the negative electrode (top layer), a salt mixture containing magnesium chloride for the electrolyte (middle layer) and antimony for the positive electrode (bottom layer). The system would operate at a temperature of 700 degrees Celsius.

In this formulation, Sadoway explains, the battery delivers current as magnesium atoms lose two electrons, becoming magnesium ions that migrate through the electrolyte to the other electrode. There, they reacquire two electrons and revert to ordinary magnesium atoms, which form an alloy with the antimony.

To recharge, the battery is connected to a source of electricity, which drives magnesium out of the alloy and across the electrolyte, where it then rejoins the negative electrode.

The team has scaled up their experiments over the years, and now are working on a version which has 200 times the power storage capacity of the initial version.

The team is continuing to work on optimizing all aspects of the system, including the containers used to hold the molten materials and the ways of insulating and heating them, as well as ways of reducing the operating temperature to help cut energy costs.


Liquid batteries to smooth road for renewable energy

TAG:power supplies environmental electronics solar power

Yosemite's alpine chipmunks take genetic hit from climate change

The study, appearing Feb. 19, in the advance online publication of the journal Nature Climate Change, is one of the first to show a hit to the genetic diversity of a species because of a recent climate-induced change in the animals' geographic range. What's more, the genetic erosion occurred in the relatively short span of 90 years, highlighting the rapid threat changing climate can pose to a species.

With low genetic diversity a species can be more vulnerable to the effects of inbreeding, disease and other problems that threaten species survival, the researchers said.

"Climate change is implicated as the cause of geographic shifts observed among birds, small mammals and plants, but this new work shows that, particularly for mountain species like the alpine chipmunk, such shifts can result in increasingly fragmented and genetically impoverished populations," said study lead author Emily Rubidge, who conducted the research while a Ph.D. student at UC Berkeley's Museum of Vertebrate Zoology and the Department of Environmental Science, Policy and Management. "Under continued warming, the alpine chipmunk could be on the trajectory towards becoming threatened or even extinct."

Rubidge worked with Craig Moritz, professor of integrative biology and director of the Museum of Vertebrate Zoology; James Patton, professor emeritus of integrative biology and curator of the Museum of Vertebrate Zoology; and Justin Brashares, associate professor in the Department of Environmental Science, Policy and Management.

The new findings build upon previous research that found major shifts in the range of small mammals in Yosemite National Park since the early 1900s. In 2003, biologists at UC Berkeley began an ambitious resurvey of Yosemite's birds, mammals, reptiles and amphibians, retracing the steps originally taken between 1914 and 1920 by Joseph Grinnell, founder and former director of the Museum of Vertebrate Zoology.

The Grinnell Resurvey Project, led by Moritz and museum colleagues, found that many small mammals in Yosemite moved or retracted their ranges to higher, cooler elevations over the past century, a period when the average temperature in the park increased by 3 degrees Celsius, or about 5.4 degrees Fahrenheit.

It is no surprise that the alpine chipmunk (Tamias alpinus) would be more sensitive to the temperature change, since it is a high-elevation species endemic to California's Sierra Nevada, the researchers said. In the early 1900s, Grinnell and colleagues sighted alpine chipmunks at elevations of 7,800 feet. Now, the alpine chipmunk appears to be sticking to even higher elevations, retracting its range by about 1,640 feet upslope.

To test the genetic impact from that loss of geographic range, researchers compared genetic markers from 146 modern-day alpine chipmunks with those from 88 of their historical counterparts. Samples were collected from seven paired sites throughout Yosemite.

As a control, the researchers also looked at the genetics -- both historic and modern -- of lodgepole chipmunks (Tamias speciosus), a lower elevation species that had not changed its range over the past century.

The analysis of genetic markers revealed a significant decline in "allele richness" among the recently sampled alpine chipmunk populations compared with their historic counterparts. Moreover, the researchers noted that the modern chipmunks were more genetically differentiated across sites than in the past, a sign of increased fragmentation in the alpine chipmunk population.

In comparison, there were no significant changes in genetic diversity detected among the lodgepole chipmunks, a species found at elevations from 4,900 to 9,800 feet.

"Much of what we read and hear about the effects of climate change on biodiversity is based on model projections and simulations, and these models typically involve many moving parts and lots of uncertainty," said Brashares. "Thanks to the baseline provided by Joseph Grinnell's pioneering efforts in the early 20th century, we are able to go beyond projections to document how climate is altering life in California. The research led by Emily is novel and important because it shows empirically that climate change has led to the loss of genetic diversity in a wild mammal over the last several decades."

Moritz added that this study exemplifies how patterns of change in California's ecosystems can be uncovered through analyses of fossil, historic and modern records.

"At the heart of this whole enterprise is the incredibly dense historic record and specimens we have at UC Berkeley from 100 years ago," said Moritz. "These collections allow us to conduct sophisticated analyses to better understand how ecosystems are reacting to environmental changes, and to create more detailed models of future changes."

Other study co-authors are Marisa Lim, a UC Berkeley undergraduate student in integrative biology; and Cole Burton, former UC Berkeley graduate student in environmental science, policy and management (now a research associate at the University of Alberta in Canada).

Funding for this research was provided by the Natural Sciences and Engineering Research Council of Canada, UC Berkeley's Museum of Vertebrate Zoology, the Yosemite Fund, the National Geographic Society and the National Science Foundation.

Recommend this story on Facebook, Twitter,
and Google +1:


Yosemite's alpine chipmunks take genetic hit from climate change

TAG:Nature Biology Evolutionary Biology Climate Environmental Issues Global Warming

X-rays illuminate the interior of the Moon

The results are published in the Journal Nature Geoscience on 19 February 2012.

The team was led by Mirjam van Kan Parker and Wim van Westrenen from VU University Amsterdam and composed of scientists from the Universities of Paris 6/CNRS, Lyon 1/CNRS, Edinburgh, and the European Synchrotron Radiation Facility (ESRF) in Grenoble.

Five decades after the Apollo missions, the formation and geological history of the Moon still hold many secrets. The astronauts not only returned 380 kg of Moon rocks to Earth but also placed many scientific instruments on the lunar surface. Last year, NASA scientists published a new model for the make-up of the interior of the Moon, using Moonquake data from these Apollo-era seismometers. Renee Weber and her colleagues claim that the deepest parts of the lunar mantle, bordering on the small metallic core, are partially molten, by up to 30 per cent. In Earth, such bodies of magma tend to move towards the surface leading to volcanic eruptions. If the deep interior of the Moon contains so much magma, why don't we see spectacular volcanic eruptions at its surface?

The driving force for vertical movement of magma is the density difference between the magma and the surrounding solid material, making the liquid magma move slowly upwards like a bubble. The lighter the liquid magma is, the more violent the upward movement will be.

To determine the density of lunar magma, Wim van Westrenen and his colleagues synthesised moon rock in their laboratory in Amsterdam, using the composition derived from Apollo samples as their "recipe." The pressures and temperatures close to the core of the Moon are more than 45,000 bar and about 1500 degrees. It is possible to generate these extreme conditions with small samples, heating them with a high electric current while squashing them in a press. By measuring the attenuation of a powerful synchrotron X-ray beam at the ESRF traversing the sample both solid and molten, the density at high pressure and high temperature could be measured. "We had to use the most brilliant X-ray beam in the world for this experiment because the magma sample is so tiny and confined in a massive, highly absorbing container. Without a bright beam of X-rays, you cannot measure these density variations," says Mohamed Mezouar from the ESRF.

The measurements at the ESRF were combined with computer simulations to calculate the magma density at any location in the Moon.

Nearly all the lunar magmas were found to be less dense than their solid surroundings, similar to the situation on Earth. There is one important exception: small droplets of titanium-rich glass first found in Apollo 14 mission samples produce liquid magma as dense as the rocks found in the deepest parts of the lunar mantle today. This magma would not move towards the surface.

Such titanium-rich magma can only be formed by melting titanium rich solid rocks. Previous experiments have shown that such rocks were formed soon after the formation of the Moon at shallow levels, close to the surface. How did they get deep into the mantle? The scientists conclude that large vertical movements must have occurred early in the history of the Moon, during which titanium-rich rocks descended from near the surface all the way to the core-mantle boundary. "After descending, magma formed from these near-surface rocks, very rich in titanium, and accumulated at the bottom of the mantle -- a bit like an upside-down volcano. Today, the Moon is still cooling down, as are the melts in its interior. In the distant future, the cooler and therefore solidifying melt will change in composition, likely making it less dense than its surroundings. This lighter magma could make its way again up to the surface forming an active volcano on the Moon -- what a sight that would be! -- but for the time being, this is just a hypothesis to stimulate more experiments," concludes Wim van Westrenen.

Recommend this story on Facebook, Twitter,
and Google +1:


X-rays illuminate the interior of the Moon

TAG:Moon Space Missions NASA Space Exploration Solar System Pluto

2012-02-18

Fruit flies use alcohol as a drug to kill parasites

"We believe our results are the first to show that alcohol consumption can have a protective effect against infectious disease, and in particular against blood-borne parasites," says Todd Schlenke, the evolutionary geneticist who led the research.

"It may be that fruit flies are uniquely adapted to using alcohol as medicine," he adds, "but our data raise an important question: Could other organisms, perhaps even humans, control blood-borne parasites through high doses of alcohol?"

Current Biology is publishing the study, co-authored by Emory graduate student Neil Milan and undergraduate student Balint Kacsoh.

The results add to the growing body of evidence that some animals know how to use toxic substances found in nature as medicine.

Drosophila melanogaster, the common fruit fly that swirls around browning bananas in your kitchen, is an important biological model system. The Schlenke lab uses D. melanogaster to study how immune systems adapt to pathogens.

The fly larvae eat the rot, or fungi and bacteria, that grows on overripe, fermenting fruit. "They're essentially living in booze," Schlenke says. "The amount of alcohol in their natural habitat can range from 5 to 15 percent. Imagine if everything that you ate and drank all day long was 5-percent alcohol. We wouldn't be able to live like that, but fruit flies are really good at detoxifying alcohol."

Tiny, endoparasitoid wasps are major killers of fruit flies. The wasps inject their eggs inside the fruit fly larvae, along with venom that aims to suppress their hosts' immune response. If the venom is effective enough, the wasp egg hatches, and the wasp larva begins to eat the fruit fly larva from the inside out. Eventually, an adult wasp emerges from the remains of the fruit fly pupa.

Some fruit flies, however, can overcome the effects of wasp venom and mount an immune response against wasp eggs. The blood cells in these fly larvae swarm over the wasp eggs and release nasty chemicals to kill them, allowing the fruit fly larvae to grow into adults.

"A constant co-evolutionary battle is going on between the immune systems of the flies and the venoms of the wasps," Schlenke says. "Any new mechanism of defense that protects flies from wasps will tend to spread through fly populations by natural selection."

Schlenke wondered if the fruit flies could be tapping the toxic effects of alcohol in their natural habitat to fight off wasps.

To test the theory, the researchers used a bisected petri dish filled with the yeast that fruit flies are normally fed in a lab environment. The yeast on one side of the dish was mixed with 6 percent alcohol, while the yeast on the other side remained alcohol-free. The researchers then released fruit fly larvae into the dish, allowing them to freely move to either side.

After 24 hours, 80 percent of the fruit fly larvae that were infected with wasps were on the alcohol side of the dish, while only 30 percent of the non-infected fruit fly larvae were on the alcohol side.

"The strength of the result was surprising," Schlenke says. "The infected fruit flies really do seem to purposely consume alcohol, and the alcohol consumption correlates to much higher survival rates."

Infected fruit flies that consumed alcohol beat out the wasps in about 60 percent of the cases, compared to a 0 percent survival rate for fruit fly controls that fed on plain yeast.

"The wasps aren't as good as the flies at handling alcohol," Schlenke says.

A developing wasp knocked out within an alcohol-consuming fly larva dies in a particularly horrible way, he adds. "The wasp's internal organs disperse and appear to be ejected out of its anus. It's an unusual phenotype that we haven't seen in our wasps before," Schlenke says.

The lab repeated the experiment using another species of wasp that specializes in laying its eggs in D. melanogaster, rather than the generalist wasp used previously. Again, 80 percent of the infected flies wound up on the alcohol side of the dish, while only 30 percent of the uninfected flies did. But the alcohol diet was far less effective against the specialist wasps, killing them in only 10 percent of the cases.

"You would expect this kind of result," Schlenke says, "since the generalist wasp species can attack plenty of other flies, but the specialist wasps are under strong pressure to adapt to the alcohol-infused habitat of D. melanogaster."

The researchers hope that their data will lead to more studies of how alcohol may control pathogens in other organisms, including humans.

"Although many studies in humans have shown decreased immune function in chronic consumers of alcohol, little attempt has been made to assay any beneficial effect of acute or moderate alcohol use on parasite mortality or overall host fitness following infection," Schlenke says.

Recommend this story on Facebook, Twitter,
and Google +1:


Fruit flies use alcohol as a drug to kill parasites

TAG:Insects (and Butterflies) Animals Microbiology Weather Environmental Issues Exotic Species

Meet plants' and algae's common ancestor: Primitive organisms not always so simple, researcher says

The image appears as part of a "Perspective" article in the Feb. 17 issue of Science.

Fred Spiegel, professor of biological sciences in the J. William Fulbright College of Arts and Sciences, suggests what microscopic parts would have been present in this common ancestor based on findings by Dana Price of Rutgers University and his colleagues, who examined the genome of a freshwater microscopic algae and determined that it showed that algae and plants are derived from one common ancestor. This ancestor formed from a merger between some protozoan-like host and cyanobacterium, a kind of bacteria that use photosynthesis to make energy, that "moved in" and became the chloroplast of this first alga. Price and his colleagues show that today's algae and plants have to be descended from this first alga, but they give no idea what it looked like.

"The work that Price and his group did nailed down what the relationships are" between this organism, the algae and plants, and all other eukaryotes, organisms that have a true nucleus in their cells, Spiegel said. "Once you know that, you can compare the structure of cells and characteristics you see in algae and plants with other eukaryotes and get a reasonable idea of what the original critter must have looked like."

For many years, scientists have speculated that the original ancestor of plants and algae must have originated from a protozoan-like organism and cyanobacteria. They theorized that at some point in the distant past the cyanobacteria became part of the other organism and created the first alga, which in turn created the opportunity for the growth into the biodiversity found in plants that we see today.

However, other scientists argued that the diversity and complexity of plants and algae suggest multiple events where different organisms merged. They pointed out that some members of the plant kingdom have simple structures and therefore must be more primitive than others.

Price and his colleagues' studied the genome of an obscure alga called Cyanophora. Their results strongly suggest that the first alga arose about a billion to a billion and a half years ago. This alga became the ancestor to the group of algae containing Cyanophora, plus the group of algae that includes the red seaweeds, plus the group that includes the green algae and the land plants. Together, these organisms form the super group called Plantae.

Based on this research, Spiegel has put forth a hypothetical snapshot of what the common ancestor of Plantae, the "first alga," might have looked like.

"The common ancestor of Plantae was an organism with very complex cells and a complex life cycle," Spiegel said. While some members of the super group Plantae may have less complex cells and life cycles, this does not mean they pre-date the common ancestor. "They're simpler because they lost parts, not because they originated that way."

Recommend this story on Facebook, Twitter,
and Google +1:


Meet plants' and algae's common ancestor: Primitive organisms not always so simple, researcher says

TAG:Endangered Plants Botany Invasive Species Early Humans Human Evolution Anthropology

Geoscientists use numerical model to better forecast forces behind earthquakes

William E. Holt, Ph.D., a professor in the Geosciences Department at Stony Brook University, and Attreyee Ghosh, Ph.D., a post doctoral associate, used their model to help explain the stresses that act on Earth's tectonic plates. Those stresses result in earthquakes not only at the boundaries between tectonic plates, where most earthquakes occur, but also in the plate interiors, where the forces are less understood, according to their paper, "Plate Motions and Stresses from Global Dynamic Models."

"If you take into account the effects of topography and all density variations within the plates -- the Earth's crust varies in thickness depending on where you are -- if you take all that into account, together with the mantle convection system, you can do a good job explaining what is going on at the surface," said Dr. Holt.

Their research focused on the system of plates that float on Earth's fluid-like mantle, which acts as a convection system on geologic time scales, carrying them and the continents that rest upon them. These plates bump and grind past one another, diverge from one another, or collide or sink (subduct) along the plate boundary zones of the world. Collisions between the continents have produced spectacular mountain ranges and powerful earthquakes. But the constant stress to which the plates are subjected also results in earthquakes within the interior of those plates.

"Predicting plate motions correctly, along with stresses within the plates, has been a challenge for global dynamic models," the researchers wrote. "Accurate predictions of these is vitally important for understanding the forces responsible for the movement of plates, mountain building, rifting of continents, and strain accumulation released in earthquakes."

Data for their global computer model came from Global Positioning System (GPS) measurements, which track the movements of Earth's crust within the deforming plate boundary zones; measurements on the orientation of Earth's stress field gleaned from earthquake faults; and a network of global seismometers that provided a picture of Earth's interior density variations. They compared output from their model with these measurements from Earth's surface.

"These observations -- GPS, faults -- allow one to test the completeness of the model," Dr. Holt said.

Drs. Ghosh and Holt found that plate tectonics is an integrated system, driven by density variations found between the surface of Earth all the way to Earth's core-mantle boundary. A surprising find was the variation in influence between relatively shallow features (topography and crustal thickness variations) and deeper large-scale mantle flow patterns that assist and, in some places, resist plate motions. Ghosh and Holt also found that it is the large-scale mantle flow patterns, set up by the long history of sinking plates, that are important for influencing the stresses within, and motions of, the plates.

Topography also has a major influence on the plate tectonic system, the researchers found. That result suggests a powerful feedback between the forces that make the topography and the 'push-back' on the system exerted by the topography, they explained.

While their model cannot accurately predict when and where earthquakes will occur in the short-term, "it can help at better understanding or forecasting earthquakes over longer time spans," Dr. Holt said. "Nobody can yet predict, but ultimately given a better understanding of the forces within the system, one can develop better forecast models."

Recommend this story on Facebook, Twitter,
and Google +1:


Geoscientists use numerical model to better forecast forces behind earthquakes

TAG:Earthquakes Natural Disasters Geology Computer Modeling Mathematical Modeling Artificial Intelligence

2012-02-17

Researchers make living model of brain tumor

Results appear in Theranostics.

Brown University scientists have created the first three-dimensional living tissue model, complete with surrounding blood vessels, to analyze the effectiveness of therapeutics to combat brain tumors. The 3-D model gives medical researchers more and better information than Petri dish tissue cultures.

The researchers created a glioma, or brain tumor, and the network of blood vessels that surrounds it. In a series of experiments, the team showed that iron-oxide nanoparticles ferrying the chemical tumstatin penetrated the blood vessels that sustain the tumor with oxygen and nutrients. The iron-oxide nanoparticles are important, because they are readily taken up by endothelial cells and can be tracked by magnetic resonance imaging.

Previous experiments have shown that tumstatin was effective at blocking endothelial cell growth in gliomas. The tests by the Brown researchers took it to another level by confirming, in a 3-D, living environment, the iron-oxide nanoparticles' ability to reach blood vessels surrounding a glioma as well as tumstatin's ability to penetrate endothelial cells.

"The 3-D glioma model that we have developed offers a facile process to test diffusion and penetration into a glioma that is covered by a blood vessel-like coating of endothelial cells," said Don Ho, a graduate student in the lab of chemistry professor Shouheng Sun and the lead author of the paper in the journal Theranostics. "This assay would save time and money, while reducing tests in living organisms, to examine an agent's 3-D characteristics such as the ability for targeting and diffusion."

The tissue model concept comes from Jeffrey Morgan, a bioengineer at Brown and a corresponding author on the paper. Building on that work, Ho and others created an agarose hydrogel mold in which rat RG2-cell gliomas roughly 200 microns in diameter formed. The team used endothelial cells derived from cow respiratory vessels, which congregated around the tumor and created the blood vessel architecture. The advantage of a 3-D model rather than Petri-dish-type analyses is that the endothelial cells attach to the tumor, rather than being separated from the substrate. This means the researchers can study their formation and growth, as well as the action of anti-therapeutic agents, just as they would in a living organism.

"You want to see nanoparticles that diffuse through the endothelial cells, which is lost in 2-D because you just have diffusion into media," Ho said.

Other 3-D tissue models have been "forced cell arrangements," Ho said. The 3-D glioma model, in contrast, allowed the glioma and the endothelial cells to assemble naturally, just as they would in real life. "It more clearly mimics what would actually happen," Ho explained.

The group then attached tumstatin, part of a naturally occurring protein found in collagen, to iron-oxide nanoparticles and dosed the mold. True to form, the nanoparticles were gobbled up by the endothelial cells. In a series of in vitro experiments, the team reported the tumstatin iron-oxide nanoparticles decreased vasculature growth 2.7 times more than under normal conditions over eight days. "The growth is pretty much flat," Ho said. "There's no new growth of endothelial cells." The next step is to test the tumstatin nanoparticles' performance in the 3-D environment.

"This model has significant potential to help in the testing and optimization of the design of therapeutic/diagnostic nanocarriers and determine their therapeutic capabilities," the researchers write.

Contributing authors include Nathan Kohler and Aruna Sigdel, in Brown's chemistry department; Raghu Kalluri, from the Harvard Medical School, who first discovered tumstatin's anti-blood vessel growth properties; and Chenjie Xu, who earned his doctorate in chemistry at Brown last May and is at Brigham and Women's Hospital in Boston.

The National Cancer Institute of the National Institutes for Health, the National Science Foundation's Nanoscale Interdisciplinary Research Teams, the Rhode Island Biotechnology/Biomanufacturing Training Initiative, and the Brown Department of Diagnostic Imaging Fund supported the research.

Morgan has an equity interest in MicroTissues Inc., which specializes in 3-D tissue products.

Recommend this story on Facebook, Twitter,
and Google +1:


Researchers make living model of brain tumor

TAG:Brain Tumor Anemia Prostate Cancer Intelligence Psychology Hearing Impairment

Robot reconnoiters uncharted terrain

Industrial robots have been a familiar sight in the workplace for many years. In automotive and household appliance manufacture, for example, they have proved highly reliable on production and assembly lines. But now a new generation of high-tech helpers is at hand: Mobile robots are being used in place of humans to explore hazardous and difficult-to-access environments such as buildings in danger of collapsing, caves, or ground that has been polluted by an industrial accident. Equipped with sensors and optical cameras, these robots can help rescue services search for victims in the wake of natural disasters, explosions or fires, and can measure concentrations of hazardous substances.

There's just one problem: Often there is no map to show them the location of obstacles and steer them along navigable routes. Yet such maps are critical to ensuring that the high-tech machines are able to make progress, either independently or guided by remote control. Researchers at the Fraunhofer Institute for Optronics, System Technologies and Image Exploitation IOSB in Karlsruhe have now developed a roaming land robot that autonomously reconnoiters and maps uncharted terrain. The robot uses special algorithms and multi-sensor data to carve a path through unknown territory.

"To be able to navigate independently, our mobile robot has to fulfill a number of requirements. It must be able to localize itself within its immediate surroundings, continuously recalculate its position as it makes its way through the danger area, and simultaneously refine the map it is generating," says graduate engineer Christian Frey of the IOSB. To make this possible, he and his team have developed an algorithm toolbox for the robot that runs on a built-in computer. The robot is additionally equipped with a variety of sensors. Odometry sensors measure wheel revolutions, inertial sensors compute accelerations, and distance-measuring sensors register clearance from walls, steps, trees and bushes, to name but a few potential obstacles. Cameras and laser scanners record the environment and assist in the mapping process. The algorithms read the various data supplied by the sensors and use them to determine the robot's precise location. The interplay of all these different elements concurrently produces a map, which is updated continuously. Experts call the process Simultaneous Localization and Mapping, or SLAM.

Mobile robots face an additional challenge: to find the optimal path that will enable them to complete each individual task. Depending on the situation, this may be the shortest and quickest route, or perhaps the most energy-efficient, i.e. the one that uses the least amount of gasoline. When planning a course, the high-tech helpers must take into account restrictions on mobility such as a limited turning circle, and must navigate around obstacles. And should the environment change, for example as a result of falling objects or earthquake aftershocks, a robot must register this and use its toolbox to recalculate its route.

"We made our toolbox modular, so it's not difficult to adapt the algorithms to suit different types of mobile robot or specific in- or outdoor application scenarios. For example, it doesn't matter what sensor set-up is used, or whether the robot has two- or four-wheel drive," says Frey. The software can be customized to meet the needs of individual users, with development work taking just a few months. Frey adds: "The toolbox is suitable for all sorts of situations, not only accident response scenarios. It can be installed in cleaning robots or lawnmowers, for example, and a further possible application would be in roaming robots used to patrol buildings or inspect gas pipelines for weak points." From March 6-10, the IOSB researchers will be demonstrating their mobile robot technology at the CeBIT trade fair.

Recommend this story on Facebook, Twitter,
and Google +1:


Robot reconnoiters uncharted terrain

TAG:Robotics Research Engineering Detectors Robotics Artificial Intelligence Mobile Computing

Black Sand raises $10-million Series C



LONDON – Fabless chip company Black Sand Technologies Inc., which sells CMOS power amplifiers for 3G communications, has announced it has raised $10 million in a series C round of funding.

The BST34 series of power amplifiers is designed as a drop-in replacement for existing 3G gallium arsenide power amplifiers. Black Sand (Austin, Texas) said it is ramping volume production of silicon power amplifiers for use in 3G phones, tablet computers and datacards. The latest funding round was led by existing investors Northbridge Venture Partners and Austin Ventures.

"The enthusiastic commitment of our shareholders, placing $10 million in cash on the balance sheet, is a powerful endorsement of our strategy and our growing success in the market," said

"We are already shipping in volume to multiple customers, and this additional investment will allow us to take the company to the next level – in terms of new products and an expansion of the sales and technical team," said John Diehl, CEO of Black Sand, in a statement. "We have demonstrated technology leadership and commercial performance: our investors have responded to that."

"The team at Black Sand has performed impressively over the last 24 months, not only successfully productizing the silicon power amplifier concept, but also achieving significant market traction," said Basil Horangic, Partner at Northbridge Venture Partners, in the same statement.

Black Sand entered the Silicon 60, EE Times' list of emerging startup companies at version 9.0 in October 2009. The latest edition of the Silicon 60 is version 12.5, which is the subject of a detailed technology and employment digital edition which can be accessed via http://e.ubmelectronics.com/Silicon60/index.html


Related links and articles:

www.blacksand.com

News articles:


Black Sand CMOS PAs target 3G






Black Sand raises $10-million Series C

TAG:Black Sand power amplifier CMOS PA silicon 3G communications semiconductor

2012-02-16

Lattice exhibiting at Mobile World Congress (Spain) and Embedded World (Germany)

The folks from Lattice semiconductor will be exhibiting at the Mobile World Congress in Barcelona, Spain (February 27th - March 1st), where they will be featuring the company’s mobileFPGA platforms, including the new iCE40 and MachXO2 FPGAs and ispMACH 4000ZE CPLDs, making design for mobile designs easy, less expensive, and infinitely reconfigurable allowing easy modifications down the road.

Lattice will also be attending Embedded World 2012 (Feb 28th – March 1st) in Nuremberg, Germany and will be featuring its recently announced LatticeECP4 family of devices, along with various camera solutions ideal for embedded, automotive and industrial applications.

Latest mobile FPGA platforms featured at Mobile World Congress
Lattice will be exhibiting at Mobile World Congress, Feb 27th – March 1st at Fira de Barcelona in Barcelona, Spain. Lattice will be located in Hall 2.1, Stand 2.1A56, and will be featuring the company’s mobileFPGA platforms including the new iCE40 and MachXO2 FPGAs and ispMACH 4000ZE CPLDs.

More than 20 mobile products, where Lattice mobileFPGA devices enabled product designers to rapidly add differentiating features to their products, will be displayed. The company will also give demonstrations including a video camera-to-LVDS display bridge that supports 1366 x 768 pixels and 525 Mb/s transfer rates in a low cost mobileFPGA device. “Over the last two years Lattice has demonstrated the need for and viability of mobileFPGA devices,” said Gordon Hands, director of marketing at Lattice Semiconductor. “Mobile World Congress represents a great opportunity for us to further engage the ecosystem by demonstrating how to enable rapid innovation at a low cost.”

With a combination of small form factor (as small as 2.5 x 2.5mm), low power (as low as 18uW standby power) and high-volume pricing (starting below $1.00 per unit), Lattice programmable devices enable customers to easily differentiate products while dramatically decreasing time to market for mobile devices where extended battery life and portability are required. Products incorporating Lattice mobileFPGA devices include: smart phones, tablets, e-readers, digital cameras and personal navigation devices. In system programmability allows manufacturers of these products to make design changes without significant circuit board modifications.

The Company’s extensive library of more than 40 IP cores, including multiple memory controller, display, connectivity, and sensor management IP cores, together with development kits, reference designs, and state of the art development tools, help designers decrease development time, supporting instant innovation.

New products and technologies for embedded design applications
Lattice will also be attending Embedded World 2012, which will take place Feb 28th – March 1 in Nuremberg, Germany. Lattice will be exhibiting in Hall 5, Stand 142, and will be featuring among other things its recently announced LatticeECP4 family of devices.

On the stand there will be demonstrations of Lattice solutions for PCI Express and various camera solutions that are ideal for embedded, automotive and industrial applications.

PCIe Demonstrations: PCI Express will be demonstrated using a LatticeECP3 family PCI Express Development Kit, which is a complete hardware/software development environment to help accelerate the evaluation of PCI Express technology, get to a known good starting point for a design and then easily transition to design exploration. In addition, Lattice and Trellisys Ltd will demonstrate a robust and cost-effective PCIe Bus Functional Model (BFM) for Lattice's PCI Express x1 and x4 IP Cores, which will enable users to reduce design complexity and shrink the time-to-market window for their PCI Express designs.

Lattice Dual Sensor Industrial Video Demonstration: Lattice will be demonstrating Industrial camera solutions that show a full ISP (Image Signal Processor) function embedded into FPGAs at up to 1080p60. Additionally there will be a demonstration showing solutions that can bridge two or more sensors to an ISP. Many low cost ISPs can support two cameras from a processing power aspect but they only have one interface. This demonstration allows existing ISPs which were designed to interface to only one camera to support two or more. Applications such as industrial automation, 3D cameras and automotive surround view are examples where multiple cameras can be used. The demonstration will show how solutions based on programmable Logic can provide cost effective and flexible platforms for the increasing demands of video capture systems.

MachXO2 Family of Programmable Logic Devices (PLDs): The MachXO2 devices provide embedded designers an unprecedented mix of low cost, low power and high system integration. The MachXO2 family delivers a 3X increase in logic density, a 10X increase in embedded memory, more than a 100X reduction in static power and up to 30% lower cost compared to the prior generation MachXO PLD family. These devices are ideally suited for the most popular functions used in embedded system applications (telecom infrastructure, computing, high end industrial, high end medical) and embedded consumer applications (digital TVs, smart phones, GPS devices, mobile computing, digital cameras).

LatticeECP4: The Low Cost, Low Power Midrange FPGA Family: The LatticeECP4 FPGA family, with 6 Gbps SERDES in low cost wire-bond packages, powerful DSP Blocks and hard IP-based Communication Engines is engineered for cost- and power-sensitive wireless, wireline, video, and computing markets. The LatticeECP4 FPGA family builds on the award winning LatticeECP3 family by bringing premium features to mainstream customers while maintaining industry-leading low power and low cost. The LatticeECP4 devices are ideal for developing mainstream platforms for a variety of applications such as Ethernet Aggregation, Switching, Routing, Industrial Networking, Video Signal Processing, Video Transmission and Data Center Computing.

iCE40 mobileFPGA family: The ultra-low-power iCE40 devices deliver the lowest power in the smallest package. Addressing the vast array of design requirements for mobile products, the iCE40 family is ideal for industrial hand held inventory scanners, ruggedized mobile devices or other battery powered applications.


If you found this article to be of interest, visit Programmable Logic Designline where you will find the latest and greatest design, technology, product, and news articles with regard to programmable logic devices of every flavor and size (FPGAs, CPLDs, CSSPs, PSoCs...).

Also, you can obtain a highlights update delivered directly to your inbox by signing up for my weekly newsletter – just Click Here to request this newsletter using the Manage Newsletters tab (if you aren't already a member you'll be asked to register, but it's free and painless so don't let that stop you [grin]).
Lattice exhibiting at Mobile World Congress (Spain) and Embedded World (Germany)

TAG:Lattice

Lava formations in Western U.S. linked to rip in giant slab of Earth

For years scientists who study the processes underlying the planet's shifting tectonic plates and how they shape the planet have debated the origins of sudden, massive eruptions of lava at the planet's surface. In several locations around the world, such "flood basalts" are marked by immense formations of volcanic rock. A famous example is India's Deccan flood basalt, a formation widely viewed as related to the demise of the dinosaurs 65 million years ago.

Such eruptions are thought to typically occur when the head of a mantle plume, a mushroom-shaped upwelling of hot rock rising from deep within Earth's interior, reaches the surface. Now Scripps postdoctoral researcher Lijun Liu and geophysics professor Dave Stegman have proposed an alternative origin for the volcanic activity of Oregon's Columbia River flood basalt.

Liu and Stegman argue that around 17 million years ago the tectonic plate that was subducting underneath the western United States began ripping apart, leading to massive outpourings of magma. Their proposed model describes a dynamic rupture lasting two million years -- a quick eruption in geological terms -- across the so-called Farallon slab, where the rupture spread across 900 kilometers (559 miles) along eastern Oregon and northern Nevada.

"Only with a break of this scale inside the down-going slab can we reach the present day geometry of mantle we see in the area," said Liu, "and geochemical evidence from the Columbia River lavas can also be explained by our model."

"When the slab is first opened there's a little tear, but because of the high pressure underneath, the material is able to force its way through the hole. It's like in the movies when a window breaks in an airplane that is at high altitude -- since the cabin is at higher pressure, everything gets sucked out the window," said Stegman, an assistant professor with Scripps' Cecil H. and Ida M. Green Institute of Geophysics and Planetary Physics.

Liu and Stegman came upon their new mechanism by attempting to describe how the complicated structure of Earth's mantle under the western U.S. developed during the past 40 million years. The final state of their model's time-evolution matches the present day structure as imaged by the USArray, the National Science Foundation's transportable seismic network of 400 sensor stations leapfrogging across the United States.

The John Miles Fellowship, the Cecil and Ida Green Foundation and the G. Unger Vetlesen Foundation funded the study.

Recommend this story on Facebook, Twitter,
and Google +1:


Lava formations in Western U.S. linked to rip in giant slab of Earth

TAG:Geology Volcanoes Natural Disasters Earth Science Floods Earthquakes

Prions play powerful role in the survival and evolution of wild yeast strains

Prions were first found to produce heritable new traits more than a decade ago in laboratory studies of simple baker's yeast. The key discovery then was that some proteins could spontaneously switch from a normal shape into a self-perpetuating prion conformation. The switch to the prion state alters protein function, which can result in the appearance of new traits, some helpful, some detrimental. Sophisticated cellular machinery ensures that replicating prion templates are chopped into pieces that can be passed to daughter cells during cell division. Importantly, the rate at which proteins switch into and out of the prion state increases in response to environmental stress, suggesting that they are part of an inherent survival mechanism that helps yeasts adapt to changes in their surroundings.

Yet, as compelling as the case for this protein-based mechanism of inheritance is, its biological significance has been hotly debated for one key reason: prions capable of modifying phenotypes have never been found in nature. Until now.

In a massive undertaking, Whitehead Institute scientists have tested nearly 700 wild yeast strains isolated from diverse environments for the presence of known and unknown prion elements, finding them in one third of all strains. All the prions appear capable of creating diverse new traits, nearly half of which are beneficial. These unexpected findings, reported in this week's edition of the journal Nature, stand as strong evidence against the common argument that prions are merely yeast "diseases" or rare artifacts of laboratory culture.

"A huge amount of effort has gone into studying this paradigm-shifting mode of inheritance, but with no real understanding of whether it's genuinely important biologically," says Daniel Jarosz, co-first author of the Nature paper and a postdoctoral researcher in the lab of Whitehead Member Susan Lindquist. "Now it seems clear they do influence the way natural yeasts cope with changing environments and evolve in response to stress."

The hunt for prions in wild yeast strains began in the Lindquist lab when Jarosz and Randal Halfmann, then an MIT graduate student and now a fellow at the University of Texas Southwestern Medical Center, gathered hundreds of wild strains from stock centers all over the world. They then conducted a chemical screen for one well-studied prion, [PSI+], and found it in 10 wild strains. Genetic manipulations confirmed its status as a true prion. They then observed the effects of [PSI+] on biological traits by eliminating the prion conformation in these strains and exposing them to natural stresses, such as high acidity and the presence of antifungal agents. In one strain isolated from Beaujolais wine, for example, the prion resulted in the emergence of traits that could be beneficial or detrimental, depending upon environmental conditions. Another well-known prion, [MOT3+] was found in six wild strains.

To determine whether the wild yeasts might harbor other unknown prion elements, Jarosz and Halfmann exposed sets of cultures of all the wild strains to the same chemical protocol that switched [PSI+] and [MOT3+] out of their prion states. In all, 255 strains demonstrated different phenotypes under varying stressors after this treatment.

"We certainly didn't expect to see this much prion-based phenotypic diversity," Jarosz says. "It's remarkable."

Another surprise was that approximately 40% of the traits produced by the wild prions proved to beneficial to growth in the dozen different environmental conditions tested.

"How frequently beneficial they are suggests that the prions have already been subject to previous, positive selective events," says Lindquist. "We see them as part of a bet-hedging strategy that allows the yeast to alter their biological properties quickly when their environments turn unfavorable."

Convinced of the impact prions have had on yeast evolution, Lindquist speculates that these shape-shifting proteins may be "remnants of early life," from a time when inheritance was predominantly protein-based rather than nucleic-acid based. She also theorizes that prions may play such roles beyond yeast, and her lab intends to take similar approaches in the hunt for prion activity in other organisms.

This work was supported by grants from the G. Harold and Leila Y. Mathers Foundation, HHMI, the Damon Runyon Cancer Research Foundation and the National Institutes of Health (NIH Pathway to independence award).

Recommend this story on Facebook, Twitter,
and Google +1:


Prions play powerful role in the survival and evolution of wild yeast strains

TAG:Prions Wild Animals Microbes and More Environmental Issues Sustainability Geochemistry

Extreme summer temperatures occur more frequently in U.S. now, analysis shows

By analyzing observations and results obtained from climate models, a study led by Phil Duffy of the Lawrence Livermore National Laboratory showed that previously rare high summertime (June, July and August) temperatures are already occurring more frequently in some regions of the 48 contiguous United States.

"The observed increase in the frequency of previously rare summertime-average temperatures is more consistent with the consequences of increasing greenhouse gas concentrations than with the effects of natural climate variability," said Duffy, who is the lead author of a report in a recent edition of the journal, Climatic Change. "It is extremely unlikely that the observed increase has happened through chance alone."

The geographical patterns of increases in extreme summer temperatures that appear in observations are consistent with those that are seen in climate model simulations of the 20th century, Duffy said.

Duffy and colleague Claudia Tebaldi, a senior scientist at the nonprofit news and research group Climate Central, showed that the models project that previously rare summer temperatures will occur in well more than 50 percent of summers by mid-century throughout the lower 48 states.

The team first compared the period 1975-2000 to the preceding 25 years, and found that both observations and results based on 16 global climate models show that summertime-average temperatures that were rare in the earlier period occurred more often in the later period, in certain regions. The agreement between observations and models demonstrates that the models are able to simulate changes in the occurrence of extreme summertime temperatures, Duffy said.

Duffy and Tebaldi performed a statistical analysis showing that the increases in rare summer temperatures seen in the later period are very unlikely to have occurred through chance weather variations.

Next, Duffy and Tebaldi assessed the present period, by using results obtained from climate models for 1995-2024; they found that summer temperatures that were extreme during 1950-1979 occur more often in the later time period. This supports the conclusion that extreme summertime temperatures are already occurring more frequently in parts of the lower 48 states. A second statistical analysis showed that this increase also is very unlikely to be due to chance weather variations alone, such as El Ninos or La Ninas.

Finally, the team evaluated model results for 2035-2064 (representing the middle of this century) and found that extreme summertime temperatures that were rare during 1950-1979 are projected to occur in most summers throughout the 48-state region in the mid-century period. For the mid-century, summertime mean temperatures that historically occurred only 5 percent of the time are projected to occur at least 70 percent to the time everywhere in the 48 state region.

"The South, Southwest and Northeast are projected to experience the largest increases in the frequency of unusually hot summers," Duffy said. "The strong increase in extremes in the Southwest and Northeast are explained by strong historical and projected warming there. This result is based upon assuming a commonly used scenario for future emissions of carbon dioxide, the main driver of human-caused climate change.

"What was historically a one in 20-year occurrence will occur with at least a 70 percent chance every year. This work shows an example of how climate change can affect weather extremes, as well as averages."

Recommend this story on Facebook, Twitter,
and Google +1:


Extreme summer temperatures occur more frequently in U.S. now, analysis shows

TAG:Weather Climate Global Warming Severe Weather Ice Ages Environmental Issues

In new mass-production technique, robotic insects spring to life

Devised by engineers at Harvard, the ingenious layering and folding process enables the rapid fabrication of not just microrobots, but a broad range of electromechanical devices.

In prototypes, 18 layers of carbon fiber, Kapton (a plastic film), titanium, brass, ceramic, and adhesive sheets have been laminated together in a complex, laser-cut design. The structure incorporates flexible hinges that allow the three-dimensional product -- just 2.4 millimeters tall -- to assemble in one movement, like a pop-up book.

The entire product is approximately the size of a U.S. quarter, and dozens of these microrobots could be fabricated in parallel on a single sheet.

"This takes what is a craft, an artisanal process, and transforms it for automated mass production," says Pratheev Sreetharan (A.B. '06, S.M. '10), who co-developed the technique with J. Peter Whitney. Both are doctoral candidates at the Harvard School of Engineering and Applied Sciences (SEAS).

Sreetharan, Whitney, and their colleagues in the Harvard Microrobotics Laboratory at SEAS have been working for years to build bio-inspired, bee-sized robots that can fly and behave autonomously as a colony. Appropriate materials, hardware, control systems, and fabrication techniques did not exist prior to the RoboBees project, so each must be invented, developed, and integrated by a diverse team of researchers.

Less than a year ago, the group was using a painstaking and error-prone method to fold, align, and secure each of the minuscule parts and joints.

"You'd take a very fine tungsten wire and dip it in a little bit of superglue," explains Sreetharan. "Then, with that tiny ball of glue, you'd go in under a microscope like an arthroscopic surgeon and try to stick it in the right place."

"Until recently, the manual assembly process wasthe state of the art in this field," Sreetharan adds.

By the numbers

  • Folding joints: 22
  • Assembly scaffold folding joints: 115
  • Total device folding joints: 137
  • Number of brass pads for "glue" points: 52
  • Total number of "glue" points: 24
  • Mass: 90 mg
  • By mass, one U.S. quarter = 63 Harvard Monolithic Bees

The same result can now be achieved -- without human error -- through locking mechanisms and dip soldering. The new process also enables the use of cured carbon fiber, which is rigid and easy to align, rather than uncured carbon fiber, which Sreetharan compares to "wet tissue paper."

"Our new techniques allow us to use any material including polymers, metals, ceramics, and composites," says principal investigator Rob Wood, an Associate Professor of Electrical Engineering at SEAS and a Core Faculty Member at the Wyss Institute for Biologically Inspired Engineering at Harvard.

"The ability to incorporate any type and number of material layers, along with integrated electronics, means that we can generate full systems in any three-dimensional shape," Wood says. "We've also demonstrated that we can create self-assembling devices by including pre-stressed materials."

The implications of this novel fabrication strategy go far beyond these micro-air vehicles. The same mass-production technique could be used for high-power switching, optical systems, and other tightly integrated electromechanical devices that have parts on the scale of micrometers to centimeters.

Moreover, the layering process builds on the manufacturing process currently used to make printed circuit boards, which means that the tools for creating large sheets of pop-up devices are common and abundant. It also means that the integration of electrical components is a natural extension of the fabrication process -- particularly important for the size- and weight-constrained RoboBees project.

"In a larger device, you can take a robot leg, for example, open it up, and just bolt in circuit boards. We're so small that we don't get to do that. I can't put a structural mechanism in here and have it serve no electrical function."

Pointing to the carbon-fiber box truss that constitutes the pop-up bee's body frame, Sreetharan says, "Now, I can put chips all over that. I can build in sensors and control actuators."

Essentially, tiny robots can now be built by slightly bigger robots. Designing how all of the layers will fit together and fold, however, is still a very human task, requiring creativity and expertise. Standard computer-aided design (CAD) tools, typically intended for either flat, layered circuit boards or 3D objects, do not yet support devices that combine both.

Once the design is complete, though, fabrication can be fully automated, with accuracy and precision limited only by the machining tools and materials.

"The alignment is now better than we can currently measure," says Sreetharan. "I've verified it to better than 5 microns everywhere, and we've gone from a 15% yield to -- well, I don't think I've ever had a failure."

The full fabrication process will be described in the March issue of the Journal of Micromechanics and Microengineering. Co-authors and collaborators, beside Whitney, Sreetharan, and Wood, include Kevin Ma, a graduate student at SEAS; and Marc Strauss, a research assistant in Wood's lab.

The work was supported by the U.S. Army Research Laboratory, the National Science Foundation (through the Expeditions in Computing program), and the Wyss Institute.

Recommend this story on Facebook, Twitter,
and Google +1:


In new mass-production technique, robotic insects spring to life

TAG:Electronics Engineering Technology Robotics Artificial Intelligence Mobile Computing

Black hole came from a shredded galaxy

"For the first time, we have evidence on the environment, and thus the origin, of this middle-weight black hole," said Mathieu Servillat, who worked at the Harvard-Smithsonian Center for Astrophysics when this research was conducted.

Astronomers know how massive stars collapse to form stellar-mass black holes (which weigh about 10 times the mass of our sun), but it's not clear how supermassive black holes (like the four million solar-mass monster at the center of the Milky Way) form in the cores of galaxies. One idea is that supermassive black holes may build up through the merger of smaller, intermediate-mass black holes weighing hundreds to thousands of suns.

Lead author Sean Farrell, of the Sydney Institute for Astronomy in Australia, discovered this unusual black hole in 2009 using the European Space Agency's XMM-Newton X-ray space telescope. Known as HLX-1 (Hyper-Luminous X-ray source 1), the black hole weighs in at 20,000 solar masses and lies towards the edge of the galaxy ESO 243-49, which is 290 million light-years from Earth.

Farrell and his team then observed HLX-1 simultaneously with NASA's Swift observatory in X-ray and Hubble in near-infrared, optical, and ultraviolet wavelengths. The intensity and the color of the light shows a cluster of young stars, 250 light-years across, encircling the black hole. Hubble can't resolve the stars individually because the suspected cluster is too far away. The brightness and color are consistent with other clusters of young stars seen in other galaxies.

Farrell's team detected blue light from hot gas in the accretion disk swirling around the black hole. However, they also detected red light produced by much cooler gas, which would most likely come from stars. Computer models suggested the presence of a young, massive cluster of stars encircling the black hole.

"What we can definitely say with our Hubble data is that we require both emission from an accretion disk and emission from a stellar population to explain the colors we see," said Farrell.

Such young clusters of stars are commonly seen in nearby galaxies, but not outside the flattened starry disk, as found with HLX-1. The best explanation is that the HLX-1 black hole was the central black hole in a dwarf galaxy. The larger host galaxy then captured the dwarf. Most of the dwarf's stars were stripped away through the collision between the galaxies. At the same time, new young stars were formed in the encounter. The interaction that compressed the gas around the black hole also triggered star formation.

Farrell and Servillat found that the star cluster must be less than 200 million years old. This means that the bulk of the stars were formed following the dwarf's collision with the larger galaxy. The age of the stars tells how long ago the two galaxies crashed into each other.

The future of the black hole is uncertain at this stage. It depends on its trajectory, which is currently unknown. It's possible the black hole may spiral in to the center of the big galaxy and eventually merge with the supermassive black hole there. Alternately, the black hole could settle into a stable orbit around the galaxy. Either way, it's likely to fade away in X-rays as it depletes its supply of gas.

"This black hole is unique in that it's the only intermediate-mass black hole we've found so far. Its rarity suggests that these black holes are only visible for a short time," said Servillat.

More observations are planned this year to track the history of the interaction between the two galaxies.

The new findings are being published in the February 15 issue of the Astrophysical Journal Letters.

Recommend this story on Facebook, Twitter,
and Google +1:


Black hole came from a shredded galaxy

TAG:Black Holes Galaxies Stars Astronomy Astrophysics Space Telescopes

Lava formations in Western U. S. linked to rip in giant slab of Earth

For years scientists who study the processes underlying the planet's shifting tectonic plates and how they shape the planet have debated the origins of sudden, massive eruptions of lava at the planet's surface. In several locations around the world, such "flood basalts" are marked by immense formations of volcanic rock. A famous example is India's Deccan flood basalt, a formation widely viewed as related to the demise of the dinosaurs 65 million years ago.

Such eruptions are thought to typically occur when the head of a mantle plume, a mushroom-shaped upwelling of hot rock rising from deep within Earth's interior, reaches the surface. Now Scripps postdoctoral researcher Lijun Liu and geophysics professor Dave Stegman have proposed an alternative origin for the volcanic activity of Oregon's Columbia River flood basalt.

Liu and Stegman argue that around 17 million years ago the tectonic plate that was subducting underneath the western United States began ripping apart, leading to massive outpourings of magma. Their proposed model describes a dynamic rupture lasting two million years -- a quick eruption in geological terms -- across the so-called Farallon slab, where the rupture spread across 900 kilometers (559 miles) along eastern Oregon and northern Nevada.

"Only with a break of this scale inside the down-going slab can we reach the present day geometry of mantle we see in the area," said Liu, "and geochemical evidence from the Columbia River lavas can also be explained by our model."

"When the slab is first opened there's a little tear, but because of the high pressure underneath, the material is able to force its way through the hole. It's like in the movies when a window breaks in an airplane that is at high altitude -- since the cabin is at higher pressure, everything gets sucked out the window," said Stegman, an assistant professor with Scripps' Cecil H. and Ida M. Green Institute of Geophysics and Planetary Physics.

Liu and Stegman came upon their new mechanism by attempting to describe how the complicated structure of Earth's mantle under the western U.S. developed during the past 40 million years. The final state of their model's time-evolution matches the present day structure as imaged by the USArray, the National Science Foundation's transportable seismic network of 400 sensor stations leapfrogging across the United States.

The John Miles Fellowship, the Cecil and Ida Green Foundation and the G. Unger Vetlesen Foundation funded the study.

Recommend this story on Facebook, Twitter,
and Google +1:


Lava formations in Western U. S. linked to rip in giant slab of Earth

TAG:Geology Volcanoes Natural Disasters Earth Science Floods Earthquakes

Great Eruption Replay: Astronomers watch delayed broadcast of powerful stellar eruption

Dubbed the "Great Eruption," the outburst first caught the attention of sky watchers in 1837 and was observed through 1858. But astronomers didn't have sophisticated science instruments to accurately record the star system's petulant activity.

Luckily for today's astronomers, some of the light from the eruption took an indirect path to Earth and is just arriving now, providing an opportunity to analyze the outburst in detail. The wayward light was heading in a different direction, away from our planet, when it bounced off dust clouds lingering far from the turbulent stars and was rerouted to Earth, an effect called a "light echo." Because of its longer path, the light reached Earth 170 years later than the light that arrived directly.

The observations of Eta Carinae's light echo are providing new insight into the behavior of powerful massive stars on the brink of detonation. The views of the nearby erupting star reveal some unexpected results, which will force astronomers to modify physical models of the outburst.

"When the eruption was seen on Earth 170 years ago, there were no cameras capable of recording the event," explained the study's leader, Armin Rest of the Space Telescope Science Institute in Baltimore, Md. "Everything astronomers have known to date about Eta Carinae's outburst is from eyewitness accounts. Modern observations with science instruments were made years after the eruption actually happened. It's as if nature has left behind a surveillance tape of the event, which we are now just beginning to watch. We can trace it year by year to see how the outburst changed."

The team's paper will appear Feb. 16 in a letter to the journal Nature.

Located 7,500 light-years from Earth, Eta Carinae is one of the largest and brightest star systems in our Milky Way galaxy. Although the chaotic duo is known for its petulant outbursts, the Great Eruption was the biggest ever observed. During the 20-year episode, Eta Carinae shed some 20 solar masses and became the second brightest star in the sky. Some of the outflow formed the system's twin giant lobes. Before the epic event, the stellar pair was 140 times heftier than our Sun.

Because Eta Carinae is relatively nearby, astronomers have used a variety of telescopes, including the Hubble Space Telescope, to document its escapades. The team's study involved a mix of visible-light and spectroscopic observations from ground-based telescopes.

The observations mark the first time astronomers have used spectroscopy to analyze a light echo from a star undergoing powerful recurring eruptions, though they have measured this unique phenomenon around exploding stars called supernovae. Spectroscopy captures a star's "fingerprints," providing details about its behavior, including the temperature and speed of the ejected material.

The delayed broadcast is giving astronomers a unique look at the outburst and turning up some surprises. The turbulent star system does not behave like other stars of its class. Eta Carinae is a member of a stellar class called Luminous Blue Variables, large, extremely bright stars that are prone to periodic outbursts. The temperature of the outflow from Eta Carinae's central region, for example, is about 8,500 degrees Fahrenheit (5,000 Kelvin), which is much cooler than that of other erupting stars. "This star really seems to be an oddball," Rest said. "Now we have to go back to the models and see what has to change to actually produce what we are measuring."

Rest's team first spotted the light echo while comparing visible-light observations he took of the stellar duo in 2010 and 2011 with the U.S. National Optical Astronomy Observatory's Blanco 4-meter telescope at the Cerro Tololo Inter-American Observatory (CTIO) in Chile. He obtained another set of CTIO observations taken in 2003 by astronomer Nathan Smith of the University of Arizona in Tucson, which helped him piece together the whole 20-year outburst.

The images revealed light that seemed to dart through and illuminate a canyon of dust surrounding the doomed star system. "I was jumping up and down when I saw the light echo," said Rest, who has studied light echoes from powerful supernova blasts. "I didn't expect to see Eta Carinae's light echo because the eruption was so much fainter than a supernova explosion. We knew it probably wasn't material moving through space. To see something this close move across space would take decades of observations. We, however, saw the movement over a year's time. That's why we thought it was probably a light echo."

Although the light in the images appears to move over time, it's really an optical illusion. Each flash of light is reaching Earth at a different time, like a person's voice echoing off the walls of a canyon.

The team followed up its study with spectroscopic observations, using the Carnegie Institution of Washington's Magellan and du Pont telescopes at Las Campanas Observatory in Chile. That study helped the astronomers decode the light, revealing the outflow's speed and temperature. The observations showed that ejected material was moving at roughly 445,000 miles an hour (more than 700,000 kilometers an hour), which matches predictions.

Rest's group monitored changes in the intensity of the light echo using the Las Cumbres Observatory Global Telescope Network's Faulkes Telescope South in Siding Spring, Australia. The team then compared those measurements with a plot astronomers in the 1800s made of the light brightening and dimming over the course of the 20-year eruption. The new measurements matched the signature of the 1843 peak in brightness.

The team will continue to follow Eta Carinae because light from the outburst is still streaming to Earth. "We should see brightening again in six months from another increase in light that was seen in 1844," Rest said. "We hope to capture light from the outburst coming from different directions so that we can get a complete picture of the eruption."

Rest's team consists of J.L. Prieto, Carnegie Observatories, Pasadena, Calif.; N.R. Walborn and H.E. Bond, Space Telescope Science Institute, Baltimore, Md.; N. Smith, Steward Observatory, University of Arizona, Tucson; F.B. Bianco and D.A. Howell, Las Cumbres Observatory Global Telescope Network, Goleta, Calif., and University of California, Santa Barbara; R. Chornock, R.J. Foley, and W. Fong, Harvard-Smithsonian Center for Astrophysics, Cambridge, Mass.; D.L. Welch and B. Sinnott, McMaster University, Hamilton, Ontario; M.E. Huber, Johns Hopkins University, Baltimore, Md.; R.C. Smith, Cerro Tololo Inter-American Observatory, National Optical Astronomy Observatory, La Serena, Chile; I. Toledo, Atacama Large Millimeter Array (ALMA), Chile; D. Minniti, Pontifica Universidad Catolica, Santiago, Chile; and K. Mandel, Harvard-Smithsonian Center for Astrophysics, Cambridge, Mass., and Imperial College London, U.K.

Recommend this story on Facebook, Twitter,
and Google +1:


Great Eruption Replay: Astronomers watch delayed broadcast of powerful stellar eruption

TAG:Astronomy Space Telescopes Stars Black Holes Space Exploration Astrophysics

STMicro causes financial analyst concerns

MOUNTAIN VIEW, Calif.--French-Italian electronics manufacturer STMicroelectronics N.V. needs to act drastically if it is to halt its alarming profit slide and retreat into the periphery of the semiconductor space, according to financial analysts at Arete Research Services.

“In our view, the time has come for major changes among senior management, governance and the structure of the business,” said Arete in a note to investors this week, suggesting that only a demerger splitting the analog and industrial side of the business from the consumer/digital elements, coupled with more focus on efficiency would create value.

Arete said the first step was to deal decisively with ST-Ericsson which it said looks “terminally ill” and is estimated to be on track to burn through another $900 million in 2012.

Arete said it believed the division’s modem IP/team still had significant value and could be sold for around $1 billion to either Apple or Samsung who both lack modem expertise. In addition, Arete suggests transferring some application processor resources to ST's consumer business and shutting down the residual unit.

“We recognize ST-Ericsson has a deep pool of engineering talent (as there is elsewhere within ST) and that its problems stem largely from its customers, but persisting with the current strategy with yet more restructuring ignores how the market has changed,” said the report.

ST has 39 design centers, 78 sales offices spread across 36 countries and employs over 50,000 people. Revenue per employee, however, is half that of its nearest IDM peer Texas Instruments, and Arete maintains that though further restructuring would entail significant redundancies, acting sooner rather than later would at least minimize cash outflows.

“With over 6,500 employees and contractors, there is ample scope for cuts, particularly in legacy or Nokia/SonyEricsson customer support,” said Arete.

“In our view, unless ST can demonstrate it is ready to make these structural changes to unlock value across its portfolio, the next decade will be another one of underperformance and disappointment, for staff and shareholders alike,” said Arete’s report.

The ST-Ericsson's new CEO, Didier Lamouche, has already suggested making better use of internal manufacturing capabilities on 300mm and 28/32nm FDSOI technology for more sustainable differentiation, but it may not be enough.

Financially, the firm has been on the decline for a while already, with ST's revenues sinking six percent last year against the backdrop of a semiconductor industry which saw four percent growth. ST blamed its bad fortune on the unstable macro-economic climate, but Arete said the firm was suffering more from its overly heavy reliance on internal manufacturing, its over-investment in TVs, and failure to reduce exposure to Nokia, with Symbian still in decline.

ST has also seen its Compound Annual Growth Rate increase by just two percent over the last decade, while the semiconductor industry grew by a rather healthier 5.6 percent.

Arete is forecasting ST’s sales to slump a further 26 percent in 2012, predicting that this scenario would then cause ST-Ericsson to lose a further $1bn, sending its debt obligations soaring to $1.7bn by the end of the year.

Arete’s analysts go on to say that even if another round of restructuring goes ahead, the real problem rests with the lack of accountability at the top.

“Only six of ST's top 25 managers have worked outside the company in the last decade, and the average tenure at ST of 22 years is a potential reason for the lack of fresh ideas or dynamism,” said the report.

Thus, despite ST’s unarguable engineering prowess, especially in areas like MEMS, microphones, HV MOSFETs and automotive sensors, unless the firm takes drastic action, Arete’s analysts see little to be positive about.
STMicro causes financial analyst concerns

TAG:st chips wireless finance