2012-10-09

热淘古玩宝贝万名市民国庆比眼力

热淘古玩宝贝万名市民国庆比眼力

  长假期间,南艺后街的收藏品市场云集了来自全国的3000位古玩商,带来了数十万件藏品,这成为不少南京市民“淘宝”的去处.

  昨日上午,记者在南艺后街古玩市场看到,有超过万名市民聚集古玩市场淘宝.市民姜平先生早晨9点就来到这里,他带着高倍放大镜,蹲在地上,挨个把所有摊位与钱币相关的宝贝看了一遍.宝物实在太多了,看不过来,不过他还是花600元,淘到了外面要卖上千元的“刀币”.

  对于“淘宝”的感受,收藏爱好者徐大成感叹,淘宝得比眼力,如今假冒的宝贝比真品多,稍有不慎就会损失惨重,但一旦看到宝贝就要下手坚决,10月1日他看到一个老红木笔筒,想以6000元买下,犹豫了一下,等逛了一圈再想买时,发现已有人捷足先登.

  据工作人员告诉记者,长假三天来,南京市民至少花了上千万元买走自己看好的收藏品.瓷器、玉器成为市民热淘的藏品,国庆节当日,有市民花买一辆高配的奥迪A4的钱,换一块不足巴掌大的产自新疆的和田玉籽料,成交金额据说达到了40多万元.

  家中的老旧电话机,千万别当废品三文不值二文地就卖了,在古玩交易市场或许还很值钱.记者从南艺后街的古玩交流会上看到,一个20世纪70-80年代用过的手动拨号电话机,现在的交易价格至少在200-300元,而外表装饰更精细的老旧电话机,更是卖出了艺术品的价格,每部要在千元左右.



来源:新浪收藏


TAG:热淘古玩宝贝万名市民国庆比眼力 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

吉林发现远古玉猪龙和玉鸮

吉林发现远古玉猪龙和玉鸮

  元宝沟遗址位于农安县巴吉垒镇元宝沟村,南靠敖宝图泡,为吉林省文物保护单位.敖宝图泡的东、西、北三面均被高出泡面30米至50米的土岗环绕.遗址分布在土岗的缓坡上.据吉林省文物考古研究所研究员庞志国撰写的论文《农安元宝沟新石器时代遗址发掘》(《考古》1989年12期)介绍,元宝沟遗址是目前吉林省已知较早的一处新石器时代遗址,放射性碳测年距今5490年加减145年.

  近日,农安县收藏爱好者张先生向记者展示了他于2009年在元宝沟遗址附近农户手里购得的玉猪龙和玉鸮.张先生认定,玉猪龙和玉鸮应是出自元宝沟遗址.玉猪龙高5.3厘米,厚2.1厘米,宽4.2厘米.玉鸮高4.8厘米,厚1.2厘米,宽5.6厘米.

  据有关资料介绍,玉猪龙和玉鸮是红山文化玉器中的典型玉器.在内蒙古东南部和辽宁西部等红山文化分布区域中多有出土.玉猪龙形制大体相同,身体蜷曲,头部似猪,竖耳圆眼,吻部前突,前端并列双圆鼻孔.玉鸮多为扁体,雕刻简练,圆头,方尾,双翅展开,有爪的并列呈现攀附状,背部有一横穿孔.

  张先生介绍,他收藏的玉猪龙和玉鸮形制分别与红山文化玉猪龙和玉鸮的形制相似.玉料也与红山文化玉器的玉料是相近的.

  有研究人员认为,元宝沟遗址出土玉猪龙和玉鸮,说明元宝沟遗址文化类型与红山文化有密切的关系,或者说元宝沟遗址文化属于红山文化系或类型.



来源:新浪收藏


TAG:吉林发现远古玉猪龙和玉鸮 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

2012年阿拉善玉奇石旅游文化节开幕

2012年阿拉善玉奇石旅游文化节开幕

  金秋的阿拉善大地五彩斑斓、硕果飘香.9月30日,阿拉善玉·奇石文化旅游节在巴彦浩特体育场开幕.

  阿拉善盟委委员、宣传部部长萨仁图雅,盟人大工委副主任郭秀珍,副盟长田德志,盟政协副主席陈文斌,中国观赏石协会秘书长高谊明,中国玉雕艺术协会执行会长刘元生及来自全国各地的工艺美术大师、玉雕大师参加了开幕式.本次活动由阿左旗人民政府、中国玉雕艺术协会、阿拉善奇石协会共同主办.

  近年来,阿左旗依托独特的观赏石资源,大力发展观赏石文化产业,在成功打造“观赏石一条街”的基础上,2011年又建成了目前全国规模最大、档次最高的集观赏石收藏、观赏、交易为一体的专业观赏石文化园——阿拉善石博园.目前,全旗从事经营观赏石和玉雕的商户有1000多家,从业人员4万余人,年交易额达数亿元,巴彦浩特已成为全国重要的观赏石集散地之一,并且形成了集观赏石采挖、清洗、喷沙、配座、修补、包装加工等为一体的产业链.

  宝玉石是继阿拉善观赏石之后兴起的又一项朝阳产业,阿拉善观赏石除具有观赏价值以外,还具有宝玉石的所有属性,其硬度在6.5~7.5之间,石面光润,有鲜明的通透感,经过国内外玉雕大师的精雕细刻,形态各异,栩栩如生,精美绝伦,倍受国内外观赏石界专业人士和爱好者的推崇和青睐.目前,阿拉善玉已成为玉石界的“新宠”,不仅开辟了阿拉善观赏石产业发展的新领域,更开辟了中国珠宝玉石界的新领域,现已成为阿左旗经营人员最多、经济效益最好、带动产业最广、最富有生命力的富民产业.据悉,为加强阿拉善玉·奇石资源的保护性开发,阿左旗规划建设了玛瑙宝玉石创业园区、创业孵化基地和“石趣园”,并着力培育和打造中国最大的观赏石和宝玉石集散地.(曾令飞)




来源:新浪收藏


TAG:2012年阿拉善玉奇石旅游文化节开幕 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

拍卖行未雨绸缪忙秋拍造势

拍卖行未雨绸缪忙秋拍造势

  秋天是收藏的季节,而对于艺术品市场而言,这个秋天依然是“风萧萧兮易水寒”.2011年进入市场的拍卖公司很多已倒闭,今年春参拍的拍卖公司数量为224家,环比2011年秋减少了71家;拍卖会的数量为296场,比上个拍卖季减少113场.

  拍卖市场出现大逆转,一些拍卖行不得不收缩为一年两拍,甚至是一年一拍.与此同时,一些拍卖行在春秋大拍之间,剑走偏锋,争取淡季市场.荣宝斋以欧洲古董家具首次试水上海,结果“来得多,买得少”,买家举牌谨慎,拍卖远低于预期.香港佳士得借着中国兴起的“葡萄酒热”,举办名酿拍卖,“珍罕窖藏精品”和“传世欧洲珍藏”两场拍卖主打“低估价牌”,取得人民币近3500万元的总成交额.北京保利与中国嘉德的四季拍中,书画瓷杂等传统板块成交寥寥,成交率不足70%.

  日前,雅昌艺术市场监测中心调查显示,今年三季度,人们认为艺术品未来价格走向仍不明朗,市场观望情绪浓厚.在参与调查的人群中,仅有21.43%认为艺术品价格未来3个月里会上涨,而超过45% 比例的人群认为会下降,认为未来是购买艺术品的合适时机的比例超过60%.

  内外交困比耐力

  市场调整之际,拼的是耐力,有一个段子充分说明了市场有多冷.春拍结束后,主持人王刚约见各家拍卖公司老总,在电视台做了一期节目.大家不约而同的开场白竟是,春拍总算是坚持下来了.

  小公司举步维艰,大拍卖公司也被逼挖掘新品类,比如保利的设计类艺术品、华辰的苏绣、都市联盟推出的宣纸拍卖、翰海的天珠拍卖,等等.即使如此,春拍成交额的锐减仍超出很多人的预期.截至6月30日,中国艺术品拍卖总额为281.60亿元,同比2011年春下降了34.27%,环比去年秋季下降34.22%.

  有市场人士认为:“市场信心的恢复,可能需要3到5年.在此期间,市场会采取观望的态度,去重新认识艺术资产的真正价值.”《顶层》执行主编胡湖表示,2008年金融危机之后,艺术品市场却逆市而起,形成有史以来最大一波牛市.很多人都认为,股市与楼市的遇冷与艺术品市场没有关系.事实上,艺术品市场不可能脱离开大的经济形势.从2011年秋天起,在内外经济恶化的影响之下,艺术品市场急转直下,跌得比股市楼市还要快.

  目前,艺术品市场的趋冷还在继续.从内外部环境来看,旧的问题没有解决,新的问题又突显出来.市场资深专家龚继遂表示,前两年艺术品市场的高度繁荣完全靠流动性过剩推动,这是不能持续的; 今年的查税风波突显艺术品关税高税率问题,拍卖场的优质拍品均是海外回流,高税率无疑抑制了其发展; 三是投资主导的艺术品市场面临套现,随着明年套现回购时刻的到来,艺术品的价格将受到承压.

  除外部环境外,行业发展的弊端也对市场产生影响,“金缕玉衣”、“天价汉凳”等假拍拍假现象暴露出监管缺位.其次,流拍率高与拍而不买现象严重,最突出的事件是,以4.368亿元成交的《砥柱铭》至今未付款.诚信与规范化问题正在制约中国拍卖行业的发展.

  内外交困之下,北京保利、中国嘉德两家内地拍卖巨头均挥师海外,先后在香港设立分公司.中国嘉德率先于10月初推出香港首拍,推出中国书画和古董家具两个专场.保利拍卖董事长赵旭向媒体透露,保利的香港首拍将于11月份举行,首拍将分油画、瓷杂、书画、珠宝等四大板块,所有拍品全部来自海外回流.

  北京匡时拍卖董事长董国强也表示,要看政策的动向与时机,也在考虑把一部分业务放到香港.业内专家认为,香港是自由港,除了海外回流艺术品能够避税,其他各方面的政策也比较松.但是,香港的运营成本不容忽视,租金与人力成本都比内地高出很多.这就迫使香港的画廊与拍卖行都不得不走精品路线.

  精耕细作迎秋拍

  市场人士认为,如果说今年秋拍有更好表现的话,不是市场形势有了更多更新的变化,而是拍卖公司进行精耕细作的结果.比如说,找到了更好的作品,有了更好的客户,服务更加到位等,而带来的一些成交量的增长.

  笔者了解到,今年秋拍,拍卖行在作品征集上把功夫做足做细,更注重新、奇、孤本,有的还是首次亮相.

  北京匡时秋拍征集策略别出心裁,携手雅昌艺术网推出“收藏寻城记”活动,将在全国十大文化名城陆续举行,并同时展开秋拍公开征集等活动.北京保利10月秋拍开拍在即,更是通过征集展出“钓鱼岛铁证:清嘉庆年间墨迹本《记事珠》”热场.据了解,经保利业务人员的走访,寻得目前海内外极其珍贵的历史文献资料,有清嘉庆年间墨迹本《记事珠》,它清楚地记录了沈复等人于嘉庆十三年五月十三日辰刻见到钓鱼台(即钓鱼岛)的过程.比日本宣称所谓的“古贺辰四郎1884年发现该岛”的时间早了76年.

  中国嘉德通过微博发布消息,曾长期珍藏于北京南长街54号院的梁启超家族旧藏将于秋拍上拍.这是梁氏旧藏首次曝光.据了解,这批文物共计200余件藏品,最为珍贵的是130余件康有为、梁启超的信札.嘉德发布消息没几天,匡时于9月17日举行发布会,宣布“南长街54号”藏梁氏档案,包括信札、手稿、书籍、家具等共计950件,于匡时秋拍上拍.这是市场上仅存的规模最大、题材最全面、内容最丰富的梁启超档案,其中大部分资料从未曝光.今年秋拍,大家可以看到一场两巨头关于梁启超旧藏的PK大战了.

  在中国古代美术史上占有重要地位的名作,元代大画家朱玉的《揭钵图卷》将登场今秋北京盈时拍卖.朱玉《揭钵图卷》首次亮相拍场,必是处于调整期间的中国艺术品市场一大亮点,或将成为今年中国秋拍的重中之重.

  香港苏富比秋拍将于10月5日率先举槌.今季苏富比征集了多个极为重要的海外珍藏,重点拍品计有傅抱石《石涛〈过凌敲台〉诗意》及《春词》,以及来自北美的林风眠珍藏等,全属市场首见.

  2012年是毛泽东《在延安文艺座谈会上的讲话》 发表70周年,北京长风特别策划“时代旋律”特色专场,其中新金陵画派代表艺术家傅抱石、钱松喦、宋文治、魏紫熙的作品是重中之重.

  另外,笔者了解到,江浙地区各家拍卖行加大了对寿山石的征集力度.与往年不同的是,今年各家拍卖行都在相互比拼谁能征集到好田黄.在今年春拍中,在艺术品市场整体欠佳的大环境中,田黄石的稳健表现,成为今年寿山石春拍的顶梁柱.

  (尚晓娟)



来源:新浪收藏


TAG:拍卖行未雨绸缪忙秋拍造势 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

Wearable monitoring system provides clinical support to patients at home

Wearable monitoring system provides clinical support to patients at home

STMicroelectronics announced it is providing wearable body sensor technologies to power the new BodyGuardian Remote Monitoring System from Preventice for the detection and monitoring of non-lethal cardiac arrhythmias for ambulatory patients.

The BodyGuardian RMS uses clinical algorithms that were developed by doctors at Mayo Clinic to support remote monitoring of individuals with cardiac arrhythmias. The BodyGuardian System will allow physicians to monitor key biometrics outside of the clinical setting, while patients go about their daily lives, by providing a continuous connection between the patient and their physicians.

According to Preventice, this connection is made possible by a small body-worn sensor that is attached to the patient's chest.

This sensor collects important data, including the patient's ECG, heart rate, respiration rate, and activity level and transmits that data to physicians via mobile-phone technology, enabling doctors to monitor patients from their iPad or desktop. The wearable body sensor in the BodyGuardian RMS is enabled by ST hardware and software technology that includes sophisticated MEMS, low-power STM32 microcontrollers, and analog components combined with advanced ST-proprietary algorithms.

The potential for remote patient monitoring to reduce patient costs and influence care delivery is contributing to rapid growth in the use of wireless monitoring, which is expected to continue in the coming years.

Visit STMicroelectronics at http://www.st.com.

Visit Preventice at http://www.preventice.com.

This article originally appeared on EE Times Europe.


TAG:Wearable monitoring system Remote Monitoring telehealth telemedicine

Software framework helps designers to develop car-to-x applications

Software framework helps designers to develop car-to-x applications

At the ITS World Congress 2012 to be held later this year in Vienna, Scientists from Fraunhofer ESK will demonstrate the car-to-x framework they developed. By means of the platform, developers can implement complex car-to-x applications such as collaborative driver assistance systems.

In the vehicle-to-environment communication scheme (car-to-x), drivers receive precise information on their relevant environment - for example on head-on-traffic or road conditions. The goal of the technology is to provide to the driver all necessary and appropriate information to enable him to reach his destination safe and swiftly.

In addition, the system is intended to direct the traffic in a manner that enables efficient and safe travel. Car-to-x applications such as traffic congestion warnings, automatic anti-glare headlight controls or so-called "green wave" assistance (green traffic lights for cars travelling at a defined speed) help to increase traffic safety and efficiency.

Research institute Fraunhofer ESK has designed a software framework that enables designers to implement car-to-x applications, in particular in the segment of collaborative driver assistance systems and smart traffic guidance systems. Besides purely communication-oriented tasks as defined in the related ETSI ITS standards, Fraunhofer ESK has added software components, which support Rapid Prototyping. For example, the framework enables developers to access external sensors such as GPS systems as well as the vehicle's speed and radar sensors and make their data available to the car-to-x application. Digital map data can be integrated as well as dynamic environment data.

The framework also contains so called "facilities" - a middleware layer that provides a number of basic services for the applications. An example is a service that determines the exact location. Such a service is useful to implementing car-to-x applications aiming at better safety, lower fuel consumption and shorter travel times.

While hitherto only separate software components were offered, the Fraunhofer ESK framework contains a comprehensive software bundle. Out of this package, developers can select the components required for their actual use case. In addition, the package can be expanded by additional components. Unlike similar offerings, the framework is independent from any underlying hardware.

At the ITS World congress (October 22 through October 26), the Fraunhofer scientist demonstrate three prototypical applications developed with the framework. Congress attendees can witness how after a simulated accident warning information is displayed on the dashboard of a model vehicle. In addition, the occupants of this model vehicle receive data as to the direction from where a rescue vehicle will arrive, enabling the drivers to keep an emergency lane clear.

In a joint research project with carmaker Volkswagen, the scientists also developed an app for the rescuer's tablet computer that indicates which airbags in the accident vehicles have been fired, along with basic construction data of this car - an information that is relevant in particular the accident car is equipped with an hybrid electric or electric power train - in such cases the high-voltage batteries can create serious dangers for rescuers.

This article originally appeared on EE Times Europe.


TAG:car to x driver assistance vehicle to environment communication

Maxim Integrated to demo new wearable vital signs monitoring shirt at electronica 2012

Maxim Integrated to demo new wearable vital signs monitoring shirt at electronica 2012

Maxim Integrated Products is collaborating with Clearbridge VitalSigns and Orbital Research to produce a reference design for a highly integrated, telehealth fitness ('Fit') shirt that enables patient monitoring and lowers the cost of medical diagnoses.

The shirt, which enables 24/7 connected health monitoring that will help to lower medical care costs, will be demonstrated for the first time at electronica 2012. The demonstration shirt will be powered by a rechargeable Li+ battery and will be capable of measuring temperature and activity as well as featuring a 3-lead ECG.

A key attribute of the shirt will be its connectivity capabilities that feature Bluetooth to an iPhone and iPad running an app that helps to display vital signs monitoring data that can also be shown on a larger monitor if required. USB will be used for charging requirements.

The new vital signs monitoring shirt will enable medical professionals to perform frequent and less costly fitness monitoring that will lead to more effective preventive medical care. The highly integrated shirt measures 3-lead ECG, body temperature, and motion. All diagnostic tools are packaged in a shirt that is comfortable to wear.

The new 'Fit' shirt integrates dry ECG sensor technology, complex signal processing technology, temperature sensor, motion sensor, an ultra-low-power microcontroller, and wireless electronics. The design is the result of the combined experience, expertise, and inventive synergies from three collaborating companies, Maxim Integrated, Clearbridge VitalSigns, and Orbital Research. The shirt represents a new era in preventive medical care that could reduce health care costs by up to 10x.

"Maxim is working through business relationships with companies like Clearbridge VitalSigns and Orbital Research to enable new integrated solutions that are already advancing new techniques of medical delivery," said Chris Neil, Senior Vice President for Maxim. "The market for wearable devices will reach more than 100 million units annually by 2016 according to ABI Research."

Maxim Integrated has made several contributions to the new 'Fit' shirt which includes the ultra-low power MAXQ622 microcontroller for easy-to-use and easy-to-program interfacing of multiple technologies. In addition, the MAX8671 power-management IC will deliver quiet supplies and efficient switching to the various sensors. The MAX6656 ultra-low-power temperature sensor will be used to enable plug-and-play integration into the system while Maxim's MAX3204 USB protector ensures safe handling and removed shock and ESD hazard from the electronics.

As part of the project Clearbridge VitalSigns is providing the company's ultra-low-power, multichannel CBVS1202 ECG-on-a-chip for an extended period of 3-lead ECG data acquisition. Clearbridge VitalSign's advanced motion artifact rejection algorithms will be used to separate the ECG signal from the noise which overcomes the mechanical challenges of making the shirt comfortable for almost any shaped wearer while ensuring good electrode placement and good quality signals. The shirt will also feature Clearbridge VitalSign's innovative 3-lead ultra-thin CardioLeaf housing design together with a fully integrated GUI application on desktop and mobile device.

Orbital Research's input to the shirt design includes Patented and FDA cleared dry electrodes that enable the capture of all the nuances of ECG waveform morphology with no discomfort to the wearer of the shirt. The dry electrodes do not require skin preparation or adhesives which allows reading continuous clinical-grade ECG signals from the host wearer for extended periods of wear.

Maxim Integrated will demonstrate the 'Fit' shirt live at electronica 2012 (Munich/Germany, Nov 13 – 16) in Hall A6, Booth 163.

Visit Maxim Integrated at http://www.maximintegrated.com.

This article originally appeared on EE Times Europe.


TAG:telehealth wearable vital signs patient monitoring shirt fitness shirt fit shirt sensor

Smart home energy management device shipments to exceed 30 million units in 2016, says IMS Research

Smart home energy management device shipments to exceed 30 million units in 2016, says IMS Research

According to a report from IMS Research, in 2011, an estimated 3.3 million 'smart' energy management devices – not including smart meters themselves - were shipped for the residential market. This year, the market is set to grow to more than six million units.

By 2016, annual shipments are projected to be more than 30 million units, as the smart metering infrastructure develops, relevant legislation comes into force, a range of retail channels develop and managed services become more widely offered.

In the past three years, almost 60 million smart meters have been deployed – with almost 20 million including a 'HAN gateway' (home area network - typically ZigBee) to enable connectivity between the backhaul AMI (typically powerline or RF mesh) and in-home devices, such as in-home displays (IHDs).

Between 2012 and 2016, IMS Research forecasts that 300 million additional smart meters will be shipped, with a third of these including an integrated RF 'HAN gateway'. Lisa Arrowsmith, principal analyst with IMS Research explains, "A key argument for the inclusion of a HAN gateway in smart meters – aside from enabling connection to an IHD – is to enable more sophisticated pricing tariffs, such as dynamic pricing, to smooth demand peaks and avoid firing up the most costly power plants. This offers the potential for 'smart' devices, such as thermostats, appliances, and electric vehicle chargers, which can be automated to run at times when electricity is cheapest."

In some countries, legislation strongly supports the use of 'smart' devices, even going so far in some cases as to define the pairing process. In the UK and the State of Victoria in Australia, government entities are also supporting the deployment of IHDs. Unfortunately, many smart meters that have been installed to date do not feature a HAN gateway to enable connectivity to in-home devices. Even where this additional hardware is present, many utility companies have not enabled it. In many cases, even the inclusion of an activated HAN gateway can offer little value to consumers, aside from enabling connection to an in-home display.

Currently, dynamic pricing tariffs or demand-response programs are few and far between; where they are in place, consumer experiences have varied. Yet utility companies' plans for activating HAN gateways are multiplying, as is the development of more sophisticated pricing tariffs to take advantage of smart meter deployments. Still, widespread availability across many countries is still some years away.

Where HAN gateways are activated with defined pairing processes, retail channels are expected to develop for associated devices such as IHDs or smart thermostats. In the meantime, companies are deploying 'smart-ready' devices. Examples include 'smart-ready' electric water heaters and other appliances, requiring an after-market communications module that consumers themselves can connect (reducing the cost of the basic device and increasing flexibility).

Additionally, a range of devices are being developed, which can be used across multiple segments of the market. A good example is the Nest thermostat, which is available via retail channels and uses Wi-Fi to enable advanced scheduling and remote control; but it also includes ZigBee, which could make it a viable product for demand-response programs in the U.S. and certain other countries (although currently utility customers are not using it for this function).

Further, some companies are launching energy information display systems (either IHDs or gateway-based services) which can connect to the AMI network where the infrastructure is installed, enabled, and able to pair; but they also include meter clamps to enable whole-home energy consumption information to be measured where access to the AMI network is not available; and smart plugs to measure independent device-level consumption data. Often, such systems are being deployed as part of managed services by a wide range of companies including ISPs, cable operators, and security providers.

Many such companies see remote home management as the next phase of expanding the range of services they offer to customers to increase average revenue per user and reduce customer churn. Such companies will help drive the market for smart home energy management devices, to over 30 million units in 2016 alone.

Visit IMS Research at http://imsresearch.com.

This article originally appeared on EE Times Europe.


TAG:Smart home energy management smart energy HAN gateway HAN forecast research

2012-10-08

东孚玛瑙作品获中国玉石雕刻天工奖

东孚玛瑙作品获中国玉石雕刻天工奖

  金黄色的麦穗上停着一只小蚱蜢,饱满的花生粒粒分明.这是一块名为《鸣秋》的玛瑙雕刻作品,荣获中国玉石雕刻“天工奖”.

  近日,笔者在东孚发现了一批玛瑙国宝级雕刻工艺品.在展览馆里记者看到,各种各样的玛瑙工艺品陈列在橱窗里,无论是手把件,还是各种饰品.而最引人注目的是橱窗里陈列的一系列高级玛瑙工艺品,或熊猫,或花鸟,或山水,巧夺天工,制作精良,具有相当高的艺术水准.

  “一个上乘的玛瑙工艺品要经过三四个月的精雕细琢才能完成,一般的高级工艺品也需要一两个月才能完成.”玛瑙设计大师郑尚玉告诉笔者,天然玛瑙石质坚硬、润滑、凝重,因此它的雕刻比起玉石雕刻更费工夫.近期,郑大师还打造了《9·8金钥匙》等富有闽南特性的玛瑙精品.



来源:新浪收藏


TAG:东孚玛瑙作品获中国玉石雕刻天工奖 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

千里迢迢参加玉石展销6天卖了不到5件

千里迢迢参加玉石展销6天卖了不到5件

  本报株洲讯 (记者 彭丽君) 翡翠、白玉、沅江石、岫石……近日,株洲市东湖公园的中秋文化艺术展也吸引了外地不少商家,玉石展销品种达数十种,标价也从几块钱到上百万不等.昨日,记者走访发现,逛玉石展销会,看热闹的人多,买的少,不少外地商家抱怨,生意太差.

  “收到邀请函我还提前几天过来了,但是没想到生意这么差.”从辽宁特意赶过来展销岫玉的赵女士称,自己来了6天,可是大小物件加起来成交量还不足5件.近5平米的展销场所,摆满了大大小小的岫玉,“大物件有六七十种,小物件有二百多种.”

  赵女士说,自己也是全国各地都跑,但是像这次生意这么差的,非常少见,“市民好像对玉石不感冒”.

  在赵女士的展销摊位,记者看到,最贵的大件岫玉标价180万元,像小物件,最低的也只有10块钱左右.“便宜的也没有人买.”赵女士说.另外,从山东、广西等地过来展销的厂家,也遭遇了同样的情况,“是不是放假,很多老板都出去了?只希望最后几天能做几个大单.”从广西过来的胡老板无奈地说.

  记者随机采访了几位市民.有市民称,价格是一方面原因,主要是因为自己是外行,在外面不敢随便买,只能先看看.



来源:新浪收藏


TAG:千里迢迢参加玉石展销6天卖了不到5件 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

贾平凹谈收藏英石

贾平凹谈收藏英石

贾平凹谈收藏英石 名贵在于它的质朴和简约 贾平凹谈收藏英石 名贵在于它的质朴和简约

  英石产于广东的英山.这石头得天地钟灵故能镇园镇宅,得山水清气所以能养心养目.它们是中国奇石的正宗,代表了中国石文化的审美趣味.在为奇石收藏热欢欣的同时,也为赏石中的一些误区而忧心,比如当下过分追求怪异,动辄就标榜出什么石种哗众取宠,比如过分夸大矿物质石类的价值,使水晶、玛瑙、莹石之类畸形显赫,比如过分讲究具象,导致了许多人为的造型和图案.每每目睹了这种状况,我就想到英石.

  现在奇石市场上传统的名石并不多见,原因大致有两种,一是太湖石、灵璧石资源日趋枯萎,二是英石资源依然丰富,但英石产地偏南,而对英石的功能形成了固定的看法,缺乏全面的认识.

  可以说英石和太湖石、灵璧石是园林专用的名石,可英石区别于太湖石、灵璧石的不仅它用于园林更能作摆件清玩.英石有大器、中器、构件、小件之说.它的大器、中器要一石体现出山的整体为标准,峰峦起伏,嵌空穿眼,质坚苍润,扣之清越,讲究的是大气象.

  我见过现置于杭州西湖的宋时英石“绉云峰”,那块石头高达数丈,形同立云,又似摇波,令人叹为观止.我自己也收藏了一块“龙崖”英石,形如龙头但又是峦峰之状,气势雄浑,而细节处白筋勾勒,石线过渡,甚为奇巧.它的小件秀中有骨,褶皱又有白筋,形成丰富图案,而滴漏留痕,孔眼相通.古人玩这类英石“亦可点盆,亦可掇小景”.我也收藏着一件,似龙非龙,非花似花,薄处如翼,细处如针,置于案头,来人见之莫不惊艳.

  英石的名贵在于它的质朴和简约,在于它的整体的气势和细节的奇巧,如车中的“宝马”,用不着装饰,只需擦拭干净.它所具有的石文化品格,正大而独特.收藏它,欣赏它,宣传它,不仅可以纠正时下赏石趣味的弱化,也是维护和清正中国石文化精髓的一种责任.(贾平凹《说英石》,有删节)



来源:新浪收藏


TAG:贾平凹谈收藏英石 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

2012-10-06

精品奇石的十大特点(图)

精品奇石的十大特点(图)

  英德奇石协会常务副会长兼秘书长林超富介绍:

  瘦、透、漏、皱、怪势、型、景、物、质

  赏石须观察十大特点 兼具者便是真正精品

  今年49岁的林超富是英德当地知名的文化人.他不遗余力地推介本土文化品牌,包括流传已久的英石文化.不少政府官员、民间买家都愿意来找他品鉴英石.

  “很多人不懂英石的门道,搞不清楚一块英石到底好不好;有些人隐约会觉得某块英石好,但是又说不出来好在哪里.”而林超富能同时做好这两方面.他在“瘦、透、漏、皱、怪”的基础上,又总结出英石的另外五个特点——“势、型、景、物、质”,成为英德当地人赏石、藏石的重要参照.

  在传统审美标准中加入自己心得

  收藏周刊:我们应该怎样理解包括英石在内的石头文化?

  林超富:一块石头的命名,是有文化道理的.人们生活水平提高之后,对于精神方面的需求越来越大,要求也越来越高了.玩石头就是人们的一大选择.我们说玩石头,其实不是玩,而是养石头,养了就有灵性了.常言道,山无石,不秀;水无石,不清;居无石,不雅.

  收藏周刊:您能否简单说一下对英石的深刻记忆?

  林超富:我是英德人,从小就热爱英德的石头.我们从小在家里在学校里,几乎到处都可以看到英石.到了上世纪80年代,我还在读中学,发现有人从山上抬石头下来,而且用拖拉机一车一车地运出去,可以卖钱.当时,我感到很新鲜.

  收藏周刊:在您看来,要品鉴一块英石好不好,有什么标准或者窍门?

  林超富:英石从宋代以来,经过米芾、苏东坡等人对英石的总结和推动,逐渐形成了“瘦、透、漏、皱、怪”的审美标准,这被很多赏石的人熟知和认可.我自己又在这几个特点上,加了一些自己的心得,具体就是“势、型、景、物、质”——势,就是气势,立得住;型,就是造型,形状;景,就是它像什么样的风景;物,就是像什么样的物品;质,就是质地.兼具了“瘦、透、漏、皱、怪、势、型、景、物、质”这十大特点的英石,是英石中的真正精品,保值增值空间巨大.

  目前市场上还没有造假的英石

  收藏周刊:与其他奇石相比,英石的市场优势在哪里?

  林超富:我敢讲,现在是藏石最好的时代,而英石应在石头产业中占有一席之地.“四大名石”中,从目前来说,英石是最具有增值潜力的,投资前景最好.真正的灵璧石和太湖石都已经绝种了,市面上新出来的都不是天然的.而英石目前还有比较大的储藏量,可以开采的资源比较多,能保证今后一段较长时期的需求.就我看来,目前市场上还没有造假的英石.

  当然,我也建议应该现在就开始专门辟出一片地方,合理保护好英石资源,不要到以后想采都没得采了.

  收藏周刊:英石文化绵延已久,我们又该怎样进一步推广?

  林超富:自2010年,我们已经连续举办了两届英石文化节,对于英石的推广有很直接的意义,其中一个例子就是现在英石的行情、销售量、价钱比以前更好了.比方说原来一块石头,它原来是卖三千元,现在就可能是三万元了.艺术品能卖多少钱,关键是买的人认不认可.不过我觉得,英石文化的推广仍然有很大的空间.卖资源不如卖文化,我们应该想着怎样增加英石的文化附加值.



来源:新浪收藏


TAG:精品奇石的十大特点(图) 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

Moore's Law waylaid by extreme UV challenges

Moore's Law waylaid by extreme UV challenges


LEUVEN, Belgium – Moore's Law, the engine of semiconductor innovation for decades, is losing steam due to delayed introduction of next-generation extreme ultraviolet lithography. That was the verdict of experts at the 2012 International Symposium on Extreme Ultraviolet Lithography.

EUV systems need light sources that are nearly 20 times more powerful than the ones used today to lay down patterns on next-generation chips that target sizes as small as 14 nm, Following a global symposium on the topic here, a group of lithography experts said that they hope to have the 200W EUV light sources by 2014—but it may take more time.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Using less powerful light sources, researchers at the Interuniversity Microelectronics Centre (IMEC) here have created about 3,000 wafers using EUV in the past year. But the throughput of the multimillion dollar systems are still 15-30 times too slow for commercial chip makers such as Intel, Samsung and Taiwan Semiconductor Manufacturing Co.

Researchers have improved the power of light sources 20-fold over the past three years. But they must make similar heroic improvements in the next two years before EUV is ready for production, said Kurt Ronse, IMEC's director advanced lithography program, reporting on the conclusions of an EUV symposium in Brussels. The group also called for development of 500-1,000W EUV light sources by 2016.

As a result of the EUV delays “the [semiconductor] industry is no longer taking full steps, but implementing half nodes,” Ronse said. “They still call it 14 nm but it’s probably more like 16 or 17 nm,” he said.



Next: Scaling slowed
TAG:Extreme Ultraviolet NXE 3100 EUV Lithography Semiconductors Immersion Imec ASML

2012-10-05

EUV lithography delays slowing Moore's Law

EUV lithography delays slowing Moore's Law


LEUVEN, Belgium – Moore's Law, the engine of semiconductor innovation for decades, is losing steam due to delayed introduction of next-generation extreme ultraviolet lithography.

EUV systems need light sources that are nearly 20 times more powerful than the ones used today to lay down patterns on next-generation chips that target sizes as small as 14 nm, Following a global symposium on the topic this week, a group of lithography experts said that they hope to have the 200W EUV light sources by 2014—but it may take more time.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Using less powerful light sources, researchers at IMEC here have created about 3,000 wafers using EUV in the past year. But the throughput of the multimillion dollar systems are still 15-30 times too slow for commercial chip makers such as Intel, Samsung and Taiwan Semiconductor Manufacturing Co.

Researchers have improved the power of light sources 20-fold over the past three years. But they must make similar heroic improvements in the next two years before EUV is ready for production, said Kurt Ronse, IMEC's director advanced lithography program, reporting on the conclusions of an EUV symposium in Brussels. The group also called for development of 500-1,000W EUV light sources by 2016.

As a result of the EUV delays “the [semiconductor] industry is no longer taking full steps, but implementing half nodes,” Ronse said. “They still call it 14 nm but it’s probably more like 16 or 17 nm,” he said.



Next: Scaling slowed
TAG:Extreme Ultraviolet NXE 3100 EUV Lithography Semiconductors Immersion Imec ASML

Foundry sales growth hitting the skids

Foundry sales growth hitting the skids

SAN FRANCISCO—Sales growth for pure play chip foundries is slowing in the second half of 2012 after a strong second quarter, according to market research firm IHS iSuppli.

IHS (El Segundo, Calif.) said foundries likely began seeing a reduction in orders for future sales during the third quarter. While demand for advanced technology will continue to drive overall revenue growth within the industry, IHS predicted that foundries will being to feel the effects of external influences—such as a deteriorating global economy.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Pure play foundry sales grew by 16 percent in the second quarter to reach $7.8 billion, IHS said. But growth began to slow in the third quarter, with sales reaching an estimated $8.3 billion, up 8 percent from the second quarter, the firm said.



TAG:Foundry Sales Growth IHS Manufacturing

Researchers demo wireless EEG headset

Researchers demo wireless EEG headset

LEUVEN, Belgium--Imagine a $200 wireless headset that can pick up brain signals with enough sensitivity to diagnose epilepsy or help someone with attention deficit learn more effectively. That was the goal of a collaboration among two research institutes and Panasonic here.

The group demonstrated a second-generation wireless headset with greater accuracy and flexibility and more ease of use than a prototype shown in 2010. The new headset replaces passive with active electrodes, can add electrodes as needed, has less interference and does a better job tracking and correcting motion artifacts.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

The device is going into pre-clinical validation now. It is already measuring signals closely correlated to the current more expensive and bulky wired systems in use.

The wireless electroencephalogram (EEG) headset was developed by the Imec research institute here along with Panasonic and the Holst Centre in the Netherlands. The headset can continuously record up to eight EEG signals.

Separately, Imec announced it is working with Tokyo Electron Ltd. (TEL) to develop imagers and sensors to assist in growing stem cells outside the human body. "There’s a lot of interest in growing cells for tissues and ultimately organ transplants," said Paru Deshpande, program director for life sciences at Imec.

The project marks the first time TEL will send a resident researcher to Imec. The two have collaborated for many years on semiconductor programs.


The new headset uses two chips designed at Imec.

Related stories:
  • TI EEG analog front end lowers noise more than 75 percent for non-invasive brain wave monitoring
  • Flexible EEG headset permits home-based diagnosis and care
  • IMEC has a brain wave: feed EEG emotion back into games
  • TI launches low-noise electroencephalography AFE
  • Inside TI's ADS1298 analog front end for health monitoring
  • Researchers develop easy way to measure power

TAG:Brain Waves Stem Cells Tokyo Electron Electroencephalogram EEG Imec Panasonic Research Medical

Innovation thrives in Silicon 60 list of startups

Innovation thrives in Silicon 60 list of startups


EE Times has added 17 new innovators in version 14.0 of our Silicon 60 list of emerging startups. The newcomers include EDA, memory technology and processor companies along with sensors and haptics, wireless communications, power semiconductors, optoelectronics, audio and security.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]


Our list of emerging startups, first published in April 2004, is updated regularly to reflect current technology and market conditions. To make way for newcomers, some companies have dropped off the list either because they have been acquired, moved on to an initial public offering of shares or have simply matured.

Companies added to the latest version of the Silicon 60 are highlighted in red in the alphabetical listings below. They were selected based on a mix of criteria, including: technology, intended market, maturity, financial position, investment profile and executive leadership.

The Silicon 60 list includes companies developing semiconductor technologies for analog circuits, memory, logic, power, MEMS, optoelectronics, wired and wireless communications, EDA software and development support, foundry manufacturing, semiconductor production equipment, electronic subsystems, packaging and materials. They are emerging companies we deem important to follow.

We welcome nominations of emerging startups for inclusion in a future iteration of the EE Times Silicon 60 list. Nominations should be supported by a short citation explaining why a company merits consideration on a future list.

Send comments and nominations to Peter Clarke (peter.clarke@ubm.com).
Next: A to D
TAG:EE Times Silicon 60 Peter Clarke list semiconductor EDA MEMS audio processor haptics sensor CMOS display lighting optoelectronics power ARM audio 60 GHz wireless LED solar logic

2012-10-04

OpenFlow net approach struggles to come of age

OpenFlow net approach struggles to come of age


SAN JOSE, Calif. – The OpenFlow movement has been casting a shadow in Silicon Valley where it was born. But the reality is that the move to software-defined networking (SDN) remains in its infancy and relatively immature for use in grown up markets.

OpenFlow got its start at Stanford University in a research program geared to radically simplify the process of configuring and managing today’s complex multi-vendor, multi-protocol networks. Its aim was to let any programmer issue commands in high-level languages to servers that would control networks.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

This vision generated a tsunami of interest particularly from Google, one of OpenFlow’s biggest proponents. Simplification is a top priority for the Internet giant as it wrestles with some of the world’s largest and most secretive global nets.

OpenFlow also has its skeptics, especially among the world’s biggest communications vendors. If the OpenFlow vision is realized, tomorrow’s servers could handle many of the jobs run today on their big routers and switches.

In an OpenFlow world, complex ASICs used by comms gear makers like Alcatel-Lucent, Ericsson, Cisco, Huawei, Juniper and others could shrink to simpler merchant chips. Their resulting routers and switches could collapse to commodity status like the servers that would control them.

But a closer look at OpenFlow shows it is little more than a skeleton that cannot yet handle the wealth of functions running on today’s networks. What’s more, even proponents say some of the early implementations of OpenFlow aren’t fully compatible given the spec’s immaturity.

But like everything else in Silicon Valley, OpenFlow is changing rapidly. The Open Networking Foundation (ONF) that manages OpenFlow announced plans this summer for four new working groups that aim to help flesh out the technology.



Next: Four steps forward
TAG:Software Defined Network Open Networking Foundation Alcatel Lucent OpenFlow SDN ONF Networking Communications SDN Routers Switches ASICs Google Cisco Ericsson Huawei

英石:奇石收藏中的宝马

英石:奇石收藏中的宝马

  贾平凹

  英石产于广东的英山.这石头得天地钟灵故能镇园镇宅,得山水清气所以能养心养目.它们是中国奇石的正宗,代表了中国石文化的审美趣味. 在为奇石收藏热欢欣的同时,也为赏石中的一些误区而忧心,比如当下过分追求怪异,动辄就标榜出什么石种哗众取宠,比如过分夸大矿物质石类的价值,使水晶、玛瑙、莹石之类畸形显赫,比如过分讲究具象,导致了许多人为的造型和图案.每每目睹了这种状况,我就想到英石.

  现在奇石市场上传统的名石并不多见,原因大致有两种,一是太湖石、灵璧石资源日趋枯萎,二是英石资源依然丰富,但英石产地偏南,而对英石的功能形成了固定的看法,缺乏全面的认识.

  可以说英石和太湖石、灵璧石是园林专用的名石,可英石区别于太湖石、灵璧石的不仅它用于园林更能作摆件清玩.英石有大器、中器、构件、小件之说.它的大器、中器要一石体现出山的整体为标准,峰峦起伏,嵌空穿眼,质坚苍润,扣之清越,讲究的是大气象.

  我见过现置于杭州西湖的宋时英石“绉云峰”,那块石头高达数丈,形同立云,又似摇波,令人叹为观止.我自己也收藏了一块“龙崖”英石,形如龙头但又是峦峰之状,气势雄浑,而细节处白筋勾勒,石线过渡,甚为奇巧.它的小件秀中有骨,褶皱又有白筋,形成丰富图案,而滴漏留痕,孔眼相通.古人玩这类英石“亦可点盆,亦可掇小景”.我也收藏着一件,似龙非龙,非花似花,薄处如翼,细处如针,置于案头,来人见之莫不惊艳.

  英石的名贵在于它的质朴和简约,在于它的整体的气势和细节的奇巧,如车中的“宝马”,用不着装饰,只需擦拭干净.它所具有的石文化品格,正大而独特.收藏它,欣赏它,宣传它,不仅可以纠正时下赏石趣味的弱化,也是维护和清正中国石文化精髓的一种责任.

  (摘自《说英石》,有删节)



来源:新浪收藏


TAG:英石:奇石收藏中的宝马 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

一块翡翠原石估价500万(图)

一块翡翠原石估价500万(图)

赌石现场.记者 邵丹 摄 赌石现场.记者 邵丹 摄 市民淘宝.记者 黄阳阳 摄 市民淘宝.记者 黄阳阳 摄

  中国江苏网10月3日讯 “绿的,飘蓝花,有货!”围观的人群不停发出一阵阵惊叹.昨天上午,南京夫子庙秦淮古玩城内人潮如涌,这里正在进行“点石成金——十一黄金周秦淮赌石会暨免费公益翡翠珠宝玉石鉴定”活动,在赌石展台前,摆着3000公斤从缅甸运来的毛料翡翠玉石.传说中的“一刀穷,一刀富,一刀劈开亿万户”是啥样,记者在现场开了眼界.

  300元切出一块3万元的翡翠

  3000公斤的丑石头,有灰色、有黑色,不少表皮上还点缀着零星的绿色,堆在一起,乍一看不觉得有什么神奇之处,如果你有眼光,就会发现丑石中可能藏着剔透的翡翠美玉.惊险刺激的赌石现场,成了人气最高的展台.

  “我来挑选一块,这个行吗?”家住夫子庙的谢小姐今年26岁,以前是在电视中看到“赌石”,觉得好玩,昨天亲自挑了一块拳头大小的石头,拿着手电筒一照,包裹在石皮下面似乎有些绿色.

  现场的工作人员立即用电锯锯开一个外壳,“啧啧,有绿色!种水也不错.”鉴宝专家谢龙告诉谢小姐,切开来的石片就能做一个两三千元的翡翠挂件,整个石头差不多值3万元.谢小姐拿着石头很兴奋.

  “云南老鸟”连开三石却“没绿”

  “赌石”玩的就是心跳,有市民手拿电筒照、有的拿着小水壶给石头浇水,“把石头表面浇湿,再用强光手电打上去,就可以看清楚石头里面是不是有绿,绿的成色怎么样.”一位50多岁的市民一边看,一边向周围的人讲解.

  但是不是具备理论就能赌到好石头呢?周围市民也有怀疑者:“如果用手电筒就能照出来的话,那大家都可以发财了.谢龙也肯定了这种说法,外表都包裹着一层厚厚的“死皮”,所以从外表很难看出里面翡翠玉的成色.

  “有绿,有绿!”在昨天的现场,云南来宁打工的徐伟从8点左右就来了,他一直沉默不语,仔细端详着一块块的石头,当记者采访他时,他也希望在他挑选完石头之后再聊.

  “这三块石头应该有绿.”徐伟拿着三块挑选过的石头告诉记者,他曾经在缅甸买过石头,也曾经买到过差不多十多万的翡翠.“唉,可惜了.”在三块石头一一切开后,并没有想象中那么多的绿色.“一块可以做个小挂件,另外两块没什么用.”徐伟无奈地表示.

  现场最大的翡翠原石估价500万

  昨天现场最大的一块翡翠原石放在了进门第一方阵,长度超过50厘米,但让观众啧啧称奇的是,它的身价是500万!而根据专家估计,如果开出来全部是翡翠的话,按现在市场价格可以翻10倍.

  “就因为很大,前一天晚上4个工作人员抬着它,结果一位老师傅没抬住,石头跌了下来.”这一跌,把这块原石的一角磕破了.开始谁也没注意,等到原石放好了,大家用手电筒一照,发现磕破的地方泛出绿光.所有的工作人员都兴奋了.“谢龙告诉记者,“这块石头原本的定价是5万元,就因为破了皮,泄露了天机,现在这块石头怎么也得500万.”

  谢龙说,因为这块原石很大,现在能看到的这部分带绿,而且是翠绿,开出来几乎肯定有大量的翡翠.不过500万的价格毕竟不菲,现场不少观众开玩笑称“把房子卖了都买不起.”因此只好在现场成为最昂贵的展品.

  赌石注意风险 不要贪图暴利

  记者了解到,此次运抵南京的缅甸原石都来自缅甸的帕敢、达木坎和会卡等场口.谢龙告诉记者,所谓“赌石”并不是赌博,就是翡翠在开采出来后,有一层风化皮包裹着,无法知道里面的好坏,需要切割后才能知道质量,一般从外表是看不出“庐山真面目”的,即使现在的科学技术再发达,也没有一种仪器能通过这层外壳很快判断里面是“宝玉”还是“败絮”.他自己并不玩赌石,不过他曾经也有过一次“打眼”的经历.

  专家特别提醒,赌石存在较大风险性,赌石者一定要考虑清楚自身的经济实力,不要带有侥幸的心理,不要抱着大有上涨空间甚至一夜暴富的投机心理.如果考虑清楚,投资者可以拿点“闲钱”玩玩无妨,否则血本无归就得不偿失了. 记者 成岗

  相关新闻

  热淘古玩宝贝 万名市民国庆比眼力

  长假期间,南艺后街的收藏品市场云集了来自全国的3000位古玩商,带来了数十万件藏品,这成为不少南京市民“淘宝”的去处.

  昨日上午,记者在南艺后街古玩市场看到,有超过万名市民聚集古玩市场淘宝.市民姜平先生早晨9点就来到这里,他带着高倍放大镜,蹲在地上,挨个把所有摊位与钱币相关的宝贝看了一遍.宝物实在太多了,看不过来,不过他还是花600元,淘到了外面要卖上千元的“刀币”.

  对于“淘宝”的感受,收藏爱好者徐大成感叹,淘宝得比眼力,如今假冒的宝贝比真品多,稍有不慎就会损失惨重,但一旦看到宝贝就要下手坚决,10月1日他看到一个老红木笔筒,想以6000元买下,犹豫了一下,等逛了一圈再想买时,发现已有人捷足先登.

  据工作人员告诉记者,长假三天来,南京市民至少花了上千万元买走自己看好的收藏品.瓷器、玉器成为市民热淘的藏品,国庆节当日,有市民花买一辆高配的奥迪A4的钱,换一块不足巴掌大的产自新疆的和田玉籽料,成交金额据说达到了40多万元.

  家中的老旧电话机,千万别当废品三文不值二文地就卖了,在古玩交易市场或许还很值钱.记者从南艺后街的古玩交流会上看到,一个20世纪70-80年代用过的手动拨号电话机,现在的交易价格至少在200-300元,而外表装饰更精细的老旧电话机,更是卖出了艺术品的价格,每部要在千元左右.



来源:新浪收藏


TAG:一块翡翠原石估价500万(图) 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

Applied Materials slashing jobs

Applied Materials slashing jobs

SAN FRANCISCO—Semiconductor and solar panel production equipment maker Applied Materials Inc. will eliminate 900 to 1,300 jobs through a voluntary retirement program and layoffs, the company said Wednesday (Oct. 3).

The cuts, which will reduce Applied's total workforce by 6 to 9 percent, are being implemented as Applied invests in product development capabilities to spur, CEO Mike Splinter said in a statement.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

The job cuts are expected to make available $140 million to $190 million to use to fund key growth initiatives, Applied said.

"Achieving our strategic objectives requires us to deploy our talent in the best way possible," Splinter said.

The voluntary retirement program will be available to certain U.S. employees who meet minimum age and length of service requirements, as well as other criteria, Applied said. The company said the extent of layoffs globally would depend largely on the number of employees who participate in the in the voluntary retirement program.

Applied said it expects to largely complete the restructuring by the end of July 2013. Applied said it expects to incur charges of $180 million to $230 million, mostly for severance and other termination benefits. The company said it would begin recording these charges in the current quarter.

In August, Applied said it expected its orders to decline 25 to 40 percent sequentially in the current quarter, which closes at the end of this month. Executives said at the time that they expected orders for Applied's semiconductor business to decline 45 to 50 percent in the quarter.

Related stories:

  • Applied sees fab tool orders falling in 2012
  • When will NAND sales surpass DRAM?
  • Applied appoints former Varian CEO president
  • Foundries' 28-nm capacity build keeping Applied in the black
  • Applied sees flat to declining sales
  • Applied Materials CEO: solid chip-equipment spending in 2013
  • Applied Materials, IME open Singapore 3-D packaging lab
  • Applied sees strong capital spending by foundries
  • Fab tool vendor Brooks cuts 10% of workforce
  • Renesas cuts 14,000 jobs; fab sale to TSMC



TAG:Applied Materials Workforce Jobs Cuts

Semi industry fab costs limit industry growth

Semi industry fab costs limit industry growth

MANHASSET, NY -- In its latest report market research firm Gartner states that the fundamental economics of the semiconductor industry may start changing sooner rather than later and that rising costs are a permanent part of the industry.

The costs of staying at the leading edge in semiconductor manufacturing are rising with semiconductor manufacturers needing to plan on equipment costs increasing at about 15 percent for each new node.

While it's possible that 450 mm manufacturing will achieve its stated goals of a 30 percent cost reduction, that represents about only three or four years of increasing equipment costs, and consequently, delays the inevitable. It is also possible that new technologies will emerge that will slow the rate of cost increases.

Key findings in the report include that costs of manufacturing equipment needed for leading-edge semiconductor manufacturing are increasing at a rate between 7 percent and 10 percent per year, depending on the basic process.

By 2020, current cost trends will lead to an average cost of between $15 billion and $20 billion for a leading-edge fab. By 2016, the minimum capital expenditure (capex) budget needed to justify the building of a new fab will range from $8 billion to $10 billion for logic, $3.5 billion to $4.5 billion for DRAM and $6 billion to $7 billion for NAND flash.

Gartner report predicts that at current spending rates, only eight companies could afford to build fabs in the next few years.

Related articles:
Dresden fab could host 20-nm process, 450-mm wafers
Intel: 450-mm wafers must wait on 10-nm
TSMC said to plan 450-mm production for 2018
EuroFab450 is an ambitious dream
TAG:Semiconductor Industry Fab

2012-10-03

10 Hot Topics at ARM TechCon

10 Hot Topics at ARM TechCon


Looking for the agenda-topping items at ARM TechCon 2012? From the "big-little" revolution, and engineer accreditation programs, to discissions on FinFETs and more, there'll be deep technical discussions with a practical bent. Please check out our list below for a preview, and come to the conference, which runs Oct. 30 to Nov. 1 at the Santa Clara Convention Center, California.


[Designing with ARM? Get a 10% discount on ARM TechCon 2012, Oct. 30 - Nov. 1 in Santa Clara. Click here to register for the year's biggest and best live event for the ARM community. ]


1. Free training for ARM accreditation


The ARM Accredited Engineer (AAE) program will be prominent at the show. In effect, it will be a roll out for the program. ARM first talked in July about its testing scheme for engineers to qualify as AAEs; it now plans to introduce a further hierarchy of advanced and specialist qualifications.

"More exams, yuck," I here you say, but apparently it is what employers want as a means of selecting engineers who can hit the ground running with ARM-based design, so gaining the qualifications may help with employment and salary prospects.

On the first day of TechCon (Tuesday, Oct. 30) there will be whole day of training from 10:00am to 5:00pm aligned to the AAE syllabus. The day is free-of-charge and comes with a 20 percent discount on the cost of taking the exam, as long as you do so within three months. The day is estimated to be worth $500 but provided for free. Details are expected to be posted soon. On days two and three there will be the opportunity to take a mock version of the exam; a try-before-you-buy sample of the level of the questions that should take about 10 minutes I am told.



ARM is offering the chance to get more letters after your name



2. Watch the start of the big-little revolution


In the past TechCon has been a great place to watch important ideas in computing get discussed and rolled out. 2012 looks to be another such year.

ARM introduced the idea of "big-little" processing in 2011 when it introduced the Cortex-A7 processor as a companion core for the Cortex-A15. Now the idea is being turned into chips. The way it works is that for background demand processing switches to the power-optimized A7 while the A15 is off. When demand ramps up processing moves seamlessly to the A15 and the A7 switches off.

It's a neat idea that trades off some real-estate and therefore cost for a power-efficiency advantage. And at 2012's TechCon the first silicon implementation looks set to debut courtesy of Samsung.

William Kang, senior director of SOC development at Samsung promises to discuss Wednesday Oct. 31 at 11:30am how his company has implemented and extended the big-little concept in its Exynos range of processors. Brian Jeff, a product manager at ARM, is set to discuss the method and the first processors that implement big-little in a 50-minute presentation at 10:30am on Thursday (Nov. 1). Check the searchable program [link] online but I found a couple more sessions relevant to big-little on the software side.



Hands-on training is an important part of ARM TechCon


3. Go graphical

Another major thread in processing much talked about but yet to be implemented much in the real-world is using graphics processing units to do more than render images. TechCon is unlikely to disappoint on this front.

A presentation from Michael Anderson of engineering consultancy PTR Group is set to outline how to take advantage of the GPU in applications. Roberto Mijat, an ARM software solutions architect presents a couple of papers in the multimedia track on the same topic. One explores use cases and design considerations for Mali-T6XX series GPUs for general-purpose computation. The other provides an introduction to the Open Computing Language (OpenCL), a programming framework for parallel heterogeneous programming. It offers insights into programming OpenCL by example, using use cases from image processing, computational photography, and computer vision.
Next: On the show floor
TAG:ARM TechCon intellectual property ARM processor IP conference exhibition

Russian team develops x86 emulator on ARM

Russian team develops x86 emulator on ARM


SAN JOSE, Calif. – Russian engineers are developing software to run x86 programs on ARM-based servers. If successful, the software could help lower one of the biggest barriers ARM SoC makers face getting their chips adopted as alternatives to Intel x86 processors that dominate today’s server market.

Elbrus Technologies has developed emulation software that delivers 40 percent of current x86 performance. The company believes it could reach 80 percent native x86 performance or greater by the end of 2014. Analysts and ARM execs described the code as a significant, but limited option.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

A growing list of companies--including Applied Micro, Calxeda, Cavium, Marvell, Nvidia and Samsung—aim to replace Intel CPUs with ARM SoCs that pack more functions and consume less power. One of their biggest hurdles is their chips do not support the wealth of server software that runs on the x86.

The Elbrus emulation code could help lower that barrier. The team will present a paper on its work at the ARM TechCon in Santa Clara, Calif., Oct. 30-Nov. 1.

The team’s software uses 1 Mbyte of memory. “What is more exciting is the fact that the memory footprint will have weak dependence on the number of applications that are being run in emulation mode,” Anatoly Konukhov, a member of the Elbrus team, said in an e-mail exchange.

The team has developed a binary translator that acts as an emulator, and plans to create an optimization process for it.

“Currently, we are creating a binary translator which allows us to run applications,” Konukhov said. “Implementation of an optimization process will start in parallel later this year--we're expecting both parts be ready in the end of 2014."

“The major concern for us is lack of software developers with binary translation expertise,” he added. “This is also the reason for us to estimate project release in late 2014."

The Elbrus software uses a parallel compilation process and stores translations in volatile memory to decrease overhead when starting up. The binary translator will have “several levels of optimization for ‘cold’ and ‘hot’ regions of code,” said Konukhov.

Work on the software started in 2010. Last summer, Elbrus got $1.3 million in funding from the Russian investment fund Skolkovo and MCST, a veteran Russian processor and software developer. MCST also is providing developers for the Elbrus project.


Related stories:


AMCC Shows the Way for ARM Servers


Marvell quad-core ARM targets x86 servers



Next: A limited, but significant option
TAG:X86 On ARM ARM Servers Elbrus Technologies Binary Translator Emulator Emulation ARM Servers X86 Intel Processors

Mayo Clinic study confirms telemedicine with smartphones

Mayo Clinic study confirms telemedicine with smartphones

MANHASSET, NY -- A Mayo Clinic study confirms smartphones medical images are good enough to evaluate stroke patients in remote locations through telemedicine.

Mayo Clinic was the first medical center in Arizona to do pioneering clinical research to study telemedicine to serve patients with stroke in non-urban settings.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

In telestroke care, telemedicine platforms or robots located in a rural hospital lets a stroke patient be seen in real time by a neurology specialist who typically is working from a desktop or laptop computer in Phoenix. The Mayo Clinic stroke neurologist, whose face appears on a computer screen, consults with emergency room physicians at the rural sites and evaluates the patient.

The study compared the quality of medical images using a particular smartphone application to the same types of information and images typically viewed via desktop computers. Mayo Clinic neurologists worked with emergency physicians and radiologists at Yuma Regional Medical Center to compare brain scan images from 53 patients who came to that medical center with stroke.

In the study the scans were reviewed by radiologists in Yuma and a separate adjudication panel of stroke neurologists to determine the level of agreement between these traditional interpretation routes and new images and scans on smartphones interpreted by telestroke doctors. The study shows there was a high level of agreement (92 to 100 percent) among all the reviewers over the most important radiological features.

Patients showing signs of stroke can be examined by the neurologist who can also view scans of the patient's brain to detect possible damage from a hemorrhage or blocked artery. If necessary patients can be administered clot-busting medications within the narrow window of time necessary to minimize permanent injury to the brain.

“Smartphones are ubiquitous, they are everywhere. If we can transmit health information securely and simultaneously use the video conferencing capabilities for clinical assessments, we can have telemedicine anywhere, which is essential in a state like Arizona where more than 40 percent of the population doesn’t have access to immediate neurologic care, ” explained Bart Demaerschalk, M.D., professor of Neurology, and medical director of Mayo Clinic Telestroke.

The Mayo Clinic Telestroke Network includes hospitals in ten Arizona. More than 1,000 emergency consultations have taken place for stroke between Mayo Clinic stroke neurologists and physicians at the spoke centers.

The study, the first to test the effectiveness of smartphone teleradiology applications in a real-world telestroke network, was recently published in Stroke, a journal of the American Heart Association. It was funded by the Arizona Department of Health Services and the technology and technical assistance was provided by Calgary Scientific uising its ResolutionMD app.
TAG:Mayo Clinic Study Telemedicine Smartphones

Turning cyber security on its head

Turning cyber security on its head

PORTLAND, Ore.—As cyber security threats diversify, the most advanced solutions are upending the detection paradigm—from removing malicious software to installing only trusted software in the first place. Once considered too cumbersome for everyday use by IT departments, trust-based security—called application control—is now ready for mainstream IT departments, cloud deployments and virtualized environments, according to security software provider Bit9 Inc.

"Our customers believe that traditional defenses like blacklisting and scanning for malware are insufficient," said Brian Hazzard, vice president of product management at Bit9 (Waltham, Mass.). "The solution is to take trust-based security mainstream, which we hope to do by reducing administrative overhead, optimizing for virtualization, and making it scalable—from as few as 100 users to as many as 250,000 users on a single Bit9 server."

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Instead of paying a service to scan incoming files for malware, customers use Bit9 to assess whether programs are trustworthy—the opposite of traditional cyber security solutions based on blacklisting known-malicious software, then scanning incoming files for matching signatures.

Traditional virus scanners fail to spot new threats and require constant updates to keep pace, and as a consequence allow malware to steal data, record audio, track keystrokes, take screenshots, and monitor network traffic until they are detected. Trust-based cyber security systems, on the other hand, turn detection on-its-head by whitelisting trustworthy software and maintaining strict application control—only allowing trusted programs to execute.


Bit9's software dashboard. The database of known good apps can be access with Bit9's Parity Knowledge Service, which evaluates whether software is trustworthy.
Source: Bit9

TAG:Cyberspace Cyber Security Maleware Virus Worm Hacker Software EETimes NextGenLog Electronics

Globalfoundries to make MEMS for timing startup

Globalfoundries to make MEMS for timing startup


LONDON – Sand 9 Inc. (Cambridge, Mass.), a startup company offering timing components based on microelectromechanical systems (MEMS), has announced that Globalfoundries will be a partner for high volume manufacturing of its products.

Sand 9 provides MEMS timing components as alternative to quartz crystal based timing solutions. Sand 9 MEMS can be more easily integrated with other ICs for integration in mobile and consumer applications, Sand 9 asserts.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Sand 9's timing products use piezoelectric actuation of a resonator alongside a low phase-noise oscillator to enable a low-jitter product. The ability to integrate, combined with immunity to noise and shock and the ability to withstand lead-free reflow solder temperatures address certain weakness in quartz crystal performance. Applications for the company's lead product, the TCMO, include GPS, LTE, 3G and WiFi communications.

"For Sand 9, we have established a very cost-effective and novel MEMS process technology platform integrated with polysilicon through silicon vias for wafer level packaging," said Raj Kumar, senior vice president with Globalfoundries in Singapore, who has been bringing up a MEMS foundry capability there based on 200-mm wafer processing.

"Partnering with Globalfoundries allows Sand 9 to meet heightened market demand for the highest-volume mobile applications, including handsets, tablets and other consumer electronics," said Vince Graziani, CEO of Sand 9, in a statement. "Our collaboration will ensure a stable, reliable supply chain for all of our customers in mobile as well as in wireline communications infrastructure, cellular base station, and test and measurement markets."

In September Sand 9 announced that telecommunications equipment and services company Ericsson invested $3 million in the company.


Related links and articles:

www.sand9.com

News articles:


MEMS energy harvester MicroGen raises cash

Memscap partners with Chinese MEMS startup

Report highlights emerging 'killer apps' for MEMS

TAG:Sand 9 Globalfoundries MEMS timing oscillator foundry TSV semiconductor

2012-10-02

EDA extends sales growth streak

EDA extends sales growth streak

SAN FRANCISCO—EDA revenue grew to $1.59 billion in the second quarter, up 11 percent from the second quarter of 2011, according to the EDA Consortium (EDAC).

The second quarter marked the seventh time in the past eight quarters that EDAC has posted double digit percentage growth compared with the year-ago quarter, according to Walden Rhines, chairman and CEO of Mentor Graphics Corp. and a board member of EDAC.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

On a sequential basis, EDA revenue grew by 3 percent compared with the first quarter, EDAC said. The four quarter moving average of revenue—which compares the most recent four quarters to the prior four quarters—improved by 12 percent in the second quarter, EDAC said.

Rhines said posting double digit revenue gains in seven of the past eight quarters is unusual for EDA over the past decade. But over the course of EDA's history, such a string is not atypical, Rhines said.

Second quarter EDA revenue growth was broad-based, with revenue increasing year-to-year across all geographies and across nearly all of the product categories tracked by EDAC.

"Growth was driven by North America and Asia/Pacific, although all regions were positive, Rhines said. "[Computer aided design], IC physical design, and semiconductor IP all showed double-digit increases."



TAG:EDA Growth Sales Rhines

AMD wants graphics processors to run Java

AMD wants graphics processors to run Java


LONDON – Microprocessor chip company Advanced Micro Devices Inc. has announced it is joining with Oracle Inc. to work on how Java can be accelerated by a mix of processor engines including graphics processor units (GPUs).

The announcement was made during a keynote at the JavaOne 2012 conference in San Francisco by Phil Rogers, AMD Corporate Fellow and president of the Heterogenous System Architecture (HSA) president.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

AMD, Oracle and other members of the OpenJDK community are forming Project Sumatra to help bring heterogeneous computing capabilities to Java for server and cloud computing environments. The project will explore how the Java Virtual Machine, the Java language and applications programming interfaces can allow applications to be accelerated by GPUs, either in discrete graphics cards or as found in mixed-processor systems such as accelerated processing units (APUs), AMD said.


Project Sumatra is an open source project in support of Java which is related to Aparapi, an API for data parallel Java and Rootbeer, a compiler that supports Java programming on GPUs. The project may also provide guidance on enabling heterogeneous compute support for other JVM-based languages such as Scala, JRuby and Jython.

"We expect our work with AMD and other OpenJDK participants in Project 'Sumatra' will eventually help provide Java developers with the ability to quickly leverage GPU acceleration for better performance," said Georges Saab, vice president of software development for the Java Platform Group at Oracle, in a statement issued by AMD.


Related links and articles:

openjdk.java.net

News articles:

AMD's HSA club recruits six more firms

AMD lands high-performance computing guru

AMD, ARM, Imagination, TI, MediaTek form HSA group


TAG:AMD Oracle Java processors JVM API graphics GPU HSA heterog

中国传统艺术在历史长河中默默流淌

中国传统艺术在历史长河中默默流淌

  陈鹏举

  一位与古瓷器交往了几十年的人士对我说,他喜欢古瓷器是因为自己是中国人.清晨和黄昏时分,静静地面对历代瓷器,总觉得面对的是和自己同祖同宗的中国人.那古瓷姿态各异,但都是那么大度、谦恭、斯文、宁静,还有一些木讷和含蓄,所谓坐有坐姿,站有站相,这是中国人的面貌,中国人的心境,伟大的中华传统,传承给我们的模样和心情.西方的瓷器总是那么直观,西方瓷器喜欢讲述人物、动物和景致,由此,西方瓷器的姿态逼真和精准,而逼真和精准正是西方艺术的本相.中国人的艺术不是这样,中华文化传统的本相是写意,是朦胧.因此写意和朦胧是精神,是心境,而讲究逼真和精准的艺术,总是局限,不能拥有全部.这是中国人不同于西方人的地方,这是中华传统伟大之处.历代瓷器让中国人永远怦然心动,因此,历代瓷器让中国人看到了自己的神情容貌,看到了中华传统在历史的长河中默默流畅地流过.

  一位和古玉相依为命了几十年的人士近乎偏执地说,这个世界上最美好的东西便是玉了,而玉只有中国人才体察到了它的真正美好.不必说五六千年前我们的祖先就把玉看作一种无可替代的美好,就我曾见到的一个白玉盘而言,虽然年代并不长远,可盘心的几行汉隶刻款让我见之难忘,“似水似烟,似霞似云,似波似涛,是规是理是德”.这就是玉,这就是美.宗白华在谈论中国画时说过,真正的中国画应该有玉的感觉.推而言之,世界上所有美好的东西,都拥有玉的感觉.值得自豪的是,在这个崇尚美好的世界上,唯有中国人,对玉真正地怦然心动.这种怦然心动,是为着中华文化的传统;“君子比德于玉”,人应该活得和做得像玉一样美好.崇尚美玉的中华传统,像玉一样拥有千万年的宏约与深美.

  还有就是中国的书画,不知有多少中国人为之灿烂和沉醉地活过.中国画所透逸的中华传统和中国文字一样,是祖先留给我们的几乎唯一的遗产.中国画画到了今天,似乎已经到了尽头.一个晚上,寻思了良久,我忽然觉得中国画就上海而言,程十发,已经是最后的一抹光辉了.因为原来意义上的被称之为“文人画”的中国画已经渐渐消失了它的所有元素.然而明天会怎么样呢,明天的太阳照样会升起,因为中国画的第一元素——线条还活着.中国画不会停息.中国画所传承的中华传统,因为线条的不朽必然会生生不息.更可以感觉传承的是中国的书法,中国书法所展现的伟大线条,把过去和未来,这时空的两端握在了今天.所有的现代西方艺术赖以辉煌的基石——“抽象”,早已被中国人的祖先在很久远的昨天已经演绎得如火如荼.这种如火如荼的景致就是中国人的书法.赵无极在他的法国寓所珍藏着的,是中国的书法,这是赵无极功业的基石,也是赵无极心的舟楫.中华传统,因为书法,将永远生气蓬勃.这个世界说到底是由线条组成的,中国人发现了线条,也由此拥有了自己的文化传统.



来源:新浪收藏


TAG:中国传统艺术在历史长河中默默流淌 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

各种玉石近年来涨价情况

各种玉石近年来涨价情况

  和田玉:

  2006年至今,和田玉价格涨幅超10倍.红黄色皮籽料涨幅更甚.极品和田羊脂玉1kg价逾千万.每克5万元左右.

  寿山石:

  普通田黄玉单克价约1万元.顶级价过5万,稀有难得.普通的田黄玉上涨20%至30%,顶级的涨超50%.

  昆仑玉:

  1993年1kg仅0.6元、0.7元.2008年成为奥运奖牌用玉,身价大涨,近4年涨幅达500%.目前,顶级昆仑玉1kg价约5万.

  鸡血石:

  市场每克中上品价约3000元,10年时间,上品鸡血石上涨100倍,在国际上,1两上品鸡血石约15万美元,即1kg约3600万人民币.

  独山玉:

  在这7、8年间,高档独山玉的价格已经上涨了5到6倍,一些精品的价格涨10倍不止.

  黄龙玉:

  5年间黄龙玉价格涨1万倍,顶级藏品约年涨50%,普通品年涨幅10%~20%,目前价格偏高,持续上涨有难度.

  岫玉:

  4~5年中,原料从400多元/公斤上涨约20000元/公斤,其他老玉从200多元/公斤上涨2000多元/公斤.普通料从几元/公斤上涨约100多元/公斤.

  绿松石:

  2009年,竹山县几乎所有的绿松石矿关停,导致价格从去年6月至今一路走高,一年中翻了两三倍.

  钻石:

  3-3.99克拉涨30.91%,5-5.99克拉涨16.22%.今年国际报价8次上调,涨幅达30%.50分的钻石涨幅约为49%,70分的钻石涨幅约为37%,1克拉钻石涨幅约为34%,3克拉的达10万美元~50万美元不等.

  碧玺:

  宝石级的一年时间涨了两三倍上调30%左右的,首饰级的也有50%以上的涨幅.中低端提价一半以上,2克拉左右的碧玺售价已破万元.

  红宝石:

  5年上涨2~3倍,普通的1克拉红宝石戒指约几万元;5克拉以上以20万~25万元/克拉.上乘的缅甸天然红宝石每年两位数的价格上涨.每年涨20%.

  蓝宝石:

  蓝宝石价格涨25%.20年前,每块3元钱到现在的每克3千元,涨幅几千倍.

  坦桑石:

  原产地只有一个稀缺性非常明显,坦桑石价格翻2倍.

  祖母绿:

  祖母绿涨至5万元一克拉.低端祖母绿略下降.精品价格约10%持续增长,最高约30%.

  珍珠:

  淡水珠、海水珠以及南珠等各类珍珠上涨20%至30%,珍珠的大小和品质不同,上涨也不一样,个头大、质量好的珍珠上涨更大.



来源:新浪收藏


TAG:各种玉石近年来涨价情况 翡翠 翡翠手镯 中国翡翠网 翡翠新闻

Fab tool demand on the decline

Fab tool demand on the decline

SAN FRANCISCO—Global spending on semiconductor wafer fab equipment is set to fall to $31.4 billion in 2012, down 13 percent from 2011, according to market research firm Gartner Inc.

"The outlook for semiconductor equipment markets has deteriorated as the macro economy has weakened," said Bob Johnson, research vice president at Gartner, in a statement.

Johnson said wafer fab equipment started the year off strong as foundries and other logic manufacturers ramped up sub-30-nm production. But demand for new equipment will soften as yields improve, leading to declining shipment volumes for the rest of the year, Johnson said.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Gartner (Stamford, Conn.) projects that wafer fab equipment spending will further decline about 1 percent in 2013, falling to $31.2 billion. The firm projects that semiconductor equipment spending will return to growth in 2014, when it is projected to grow 15 percent.

Gartner projects that wafer fab manufacturing capacity utilization rate will decline into the low 80 percent range by the end of 2012, before slowly increasing to about 87 percent by the end of 2013. Leading-edge utilization will return to the high 80 percent range by the second half of 2012, and move into the low 90 percent range through 2013, according to Gartner's forecast.



Next: Market weakness depressing utilization
TAG:Gartner SEMI Equipment Fab Wafer

Adesto buys Atmel serial flash families

Adesto buys Atmel serial flash families


LONDON – Adesto Technologies Corp. (Sunnyvale, Calif.), developer of resistive RAM non-volatile memory based on conductive bridging random access memory (CBRAM) technology, has acquired certain serial flash product families from Atmel Corp. (San Jose, Calif.)

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

The acquisitions include the AT45xxx DataFlash and AT25xxx BIOS Flash product lines and associated patents and include IP licensing to cover support of the products and future product development.

Adesto did not disclose how much it has paid for the product lines.

Adesto said it intends to expand the Atmel product line offerings and that the newly acquired products complement Adesto's line of CBRAM devices for embedded applications. Second generation CBRAM devices are planned to ship in 2013, Adesto stated.

"The industry and market is ready for a supplier that can deliver on today's products and offer a roadmap for the next generation. Our roadmap includes higher density and higher performance devices with lower power and lower cost solutions based on an advanced memory technology that can scale with CMOS," said Narbeh Derhacobian, CEO of Adesto, in a statement.

As part of the agreement, Atmel will provide manufacturing and other transition services to Adesto for up to one year. A team of Atmel employees supporting the product lines will also join Adesto.

Adesto, founded in 2006, is included in version 13.0 of the Silicon 60 list of emerging startups published by EE Times and entered the Silicon 60 at version 10 in April 2010.


Related links and articles:

www.adestotech.com

News articles:


Altis preps wafer shuttle for embedded CBRAM

Adesto ramps CBRAM, with Altis

Adesto buys CBRAM IP from Qimonda


TAG:serial flash Adesto Atmel CBRAM non volatile memory semiconductor

2012-10-01

White space radio startup raises funds

White space radio startup raises funds


LONDON – Neul Ltd. (Cambridge, England), a startup developing a wide-area cellular network technology dedicated to machine-to-machine or Internet-of-things data traffic, has raised an additional $5 million in equity funding.

The funding, which includes new investor Mitsui & Co. Global Investment Ltd., was achieved at a 25 percent increase to the price per share in the previous funding round, Neul said. Existing shareholders, including DFJ Esprit, IQ Capital, Business Angels and founding employees, also participated in this funding. Mitsui Global Investment (MGI) is a subsidiary of Japanese trading company Mitsui & Co. Ltd.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]


Neul's first product is a radio system specifically designed for TV white space that consists of a base station, battery-powered terminal device, antennas and a set of PC based network management tools. Neul's networks are designed to operate in the licence-free television white space part of the spectrum around 400-MHz to 800-MHz.

The money raised will be used for the continued development of the technology and commercial deployment, including planned networks in the United Kingdom, United States and Singapore.

Neul is included in version 13.0 of the Silicon 60 list of emerging startups published by EE Times and entered the Silicon 60 at version 12.5 in April 2011.


Related links and articles:

www.neul.com

Webinar on over-the-air measurements of LTE MIMO-enabled devices

News articles
:

ARM adds weight to IoT debate

Neul raises $12.8 million for M2M radio

Weightless standard for IoT outlined in book

TAG:Internet of things machine to machine white space radio Neul IoT M2M VC Mitsui Singapore smartmeter

Renesas secures refinancing deals

Renesas secures refinancing deals


LONDON – Struggling Japanese chip company Renesas Electronics Corp. has announced it has agreed two deals to provide funds for the company in both the short and long term. Both deals were set to come into effect on Monday (Oct. 1) and appear to have preserved the independence and ownership structure of the company. However, the are set to trigger substantial lay-offs at Renesas and retreats from manufacturing and certain markets.

The short-term deal is a guarantee deposits agreement with Renesas stake holders NEC Corp., Hitachi Ltd. and Mitsubishi Electric Corp. and a syndicate loan agreement with Renesas' main financing banks to implement financing totaling 97 billion yen (about $1.25 billion). These agreements secure the funds for a previously announced structural reform of the company.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Renesas, which has been loss making for many quarters, has been trying to raise about $1.3 billion to execute a rescue plan that involves laying off about one third of its workforce and closing more than half its domestic manufacturing sites.

The second deal is a syndicated long-term loan of 161.1 billion yen (about $2.1 billion) being arranged with Renesas bankers Miziho Corporate Bank Ltd., Bank of Tokyo-Mitsubishi UGJ Ltd., Sumitomo Mitsui Trust Bank Ltd. and Mitsubishi UFJ Trust and Banking Corp. The banks have agreed to arrange a fund that can be used to restructure the short-term loan into long-term loan and stabilize the Renesas financial base.

Renesas states in a press release that with these financial arrangements in place it will accelerate business, financial and product offering reforms to reach profitability goals with a reduced fixed-cost base. Renesas said it intends to be a company that consistently achieves an operating profit ratio of more than 10 percent.

Renesas' struggle to raise cash for the reform led reportedly to talks in recent weeks with New York based private equity firm Kohlberg Kravis Roberts & Co. It has also been reported that a Japanese consortium including Toyota, Panasonic and a Japanese government-backed fund called the Innovation Network Corp. of Japan was looking to invest to acquire a majority stake in Renesas by the end of 2012.

Renesas, created from the chip making interests of Hitachi, Mitsubishi Electric and NEC, started trading in its present form on April 1, 2010. However, the company has been loss making since formation. For the full fiscal year ending March 31, 2013, Renesas has predicted a net loss of 150 billion yen (about $1.91 billion) on sales revenue of 883.1 billion yen (about $11.3 billion).


Related links and articles:

www.renesas.com

Webinar on Renesas MCUs and Micrium development support

News articles:


Fujitsu said to want out of chip business

Japan reportedly blocks KKR takeover of Renesas

KKR said to target Renesas with $1.27 billion bid

TAG:Renesas finance deals banks NEC Hitachi Mitsubishi

Japan invests in GaN power startup

Japan invests in GaN power startup


LONDON – Transphorm Inc. (Goleta, Calif.), a startup specializing in gallium nitride power devices made on silicon wafers, has announced it has closed a Series E round of financing worth $35 million. The round was led by Innovation Network Corp. of Japan (INCJ) and Nihon Inter Electronics Co. (NIEC).

Transphorm is looking to establish manufacturing of high-voltage GaN-on-silicon power devices that will demonstrate better power efficiency than technologies and sell components into applications including power supplies, inverters for solar panels and electric vehicles.

INCJ is a public-private partnership between the Japanese government and 27 major corporations, including Sharp, Sumitomo Electric, Toshiba and General Electric Japan that has an investment capacity of about 2 trillion yen (about $25 billion). In addition to making a financial investment NIEC has entered into a business agreement with Transphorm allowing the company to act as a second source for Transphorm products.

[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]

Existing investors in Transphorm also participated including: Kleiner Perkins Caufield & Byers, Foundation Capital, Google Ventures, Quantum Strategic Partners, Lux Capital, and Bright Capital. The Series E investment brings the total amount invested in Transphorm since its formation in 2007 to $104 million.

"Through NIEC, our customers will benefit with broader distribution channels, as well as a reputable second source for some of our packaged products," said Primit Parikh, president of Transphorm, in a statement.

Transphorm is ncluded in version 13.0 of the Silicon 60 list of emerging startups published by EE Times and entered the Silicon 60 at version 12.5 in April 2011.


Related links and articles:

www.transphormusa.com

Fundamentals of power-supply distribution topologies

News articles:


Startup opens GaN-on-Si wafer production facility

Transphorm delivers more 600-V GaN power components

GaN power market to rise to $10 million in 2012, says Yole

TAG:gallium nitride INCJ NIEC Japan GaN Transphorm power supply inverter